RTC battery
Description
RTC battery (includes cable and double-sided tape)
Before removing the RTC battery, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
5.
Remove the hard drive cover (see
Remove the RTC battery:
1.
Disconnect the RTC battery cable (1) from the system board.
2.
Detach the RTC battery (2) from the computer.
3.
Remove the RTC battery.
Reverse this procedure to install the RTC battery.
Battery on page
35).
Hard drive cover on page
Spare part number
702853-001
38).
Component replacement procedures
43