Configure Call Server; Configure Access Points; Configure Sip Handset Files; Sip Tftp Server Configuration Files - Polycom SpectraLink 8020 Administration Manual

Configure Call Server

Configure Access Points

Configure SIP Handset Files

SIP TFTP Server Configuration Files

PN: 1725-36038-001-L.doc
See the documentation which accompanies your call server. Review
the proxy information in this document for configuration
requirements. You will also need to configure an extension and
related information for each handset to be deployed.
See the documentation which accompanies your access point. It is
absolutely required that WMM be enabled on the access point.
Polycom VIEW certified access points are listed in the Polycom VIEW
Certified Products Guide. Configuration Guides for each certified
product can be found on the Polycom website. See the Related
Documents section at the beginning of this document for link
information.
In order for the handset to function in the SIP environment, it
downloads two files from the root directory of the SIP TFTP server
during startup. The first file contains generic system information and
is downloaded by every handset during the power-up sequence. A
second file, unique for each handset, is then downloaded. It contains
specific information for each handset such as username, password,
and line appearances. Both of these files must be written specifically
for the facility where the handsets will operate.
Sample files populated with default parameters are provided with the
software downloaded from the website. We recommend using these
sample files as a starting point and adjusting them according to your
system requirements.
The two file types, generic and specific, are identical in format. Any or
all of the configuration information can be contained in either file.
Any information in the specific file that conflicts with the information
in the generic file will take precedence over that in the generic file.
System Configuration
29