Diagnostics; Restore Defaults - Polycom SpectraLink 8020 Administration Manual

SpectraLink 8020/8030 Wireless Telephone: Administration Guide for SIP

Diagnostics

Restore Defaults

64
Run Site Survey
The Site Survey mode is activated by selecting this option. The site
survey starts running immediately upon selecting this option. See the
Diagnostic Tools section for more information about site survey.
Diagnostics Mode
Diagnostics can be enabled or disabled. See Chapter 8 Diagnostic Tools,
section Diagnostics Enabled for a detailed explanation of the
Diagnostics mode options.
Syslog Mode
See Chapter 8 Diagnostic Tools, section Syslog Mode for a detailed
explanation of the Syslog
Error Handling Mode
The Error Handling mode determines how the handset will behave
when an error occurs. The
to stop operating if an error message is received. Unless the error is a
fatal one, normal operation may be resumed by power-cycling the
handset. The Restart on Error
every effort to reboot quietly and quickly to standby mode. In either
scenario, a call in progress will be lost. Restart On Error should be used
unless specific error conditions are being investigated.
Error detail may be shown on the display, captured by the syslog
server and may also be available for downloading with the Handset
Administration Tool. An error memory dump can be taken and sent
to Customer Service for escalation and analysis.
The Restore Defaults option will set all user and administrative
parameters except Telephony Protocol to their factory defaults.
mode options.
Halt on Error option will cause the handset
option will cause the handset to make
PN: 1725-36038-001-L.doc