Advertisement
Products manufactured and sold by OMEGA RESEARCH & DEVELOPMENT, INC. (the Company), are
warranted to be free from defects in materials and workmanship under normal use. If a product sold by the
Company proves to be defective, the Company will repair or replace it free of charge within the first year and
thereafter all parts to be repaired will be free with only a nominal charge for Omega Research and Development,
Inc.'s labor and return shipping, to the original owner during the lifetime of the car in which it was originally
BACK COVER
installed.
All products for warranty repair must be sent postage prepaid to Omega Research & Development, Inc.,
P.O. Box 508, Douglasville, Georgia 30133, with bill of sale or other dated proof of purchase. This warranty is
PRINTER'S NOTE:
nontransferable and does not apply to any product damaged by accident, physical or electrical misuse or abuse,
improper installation, alteration, any use contrary to its intended function, unauthorized service, fire, flood,
production back cover
lightning, or other acts of God.
This warranty limits the Company's liability to the repair or replacement of the product. The Company shall
not be responsible for removal and/or reinstallation charges, damage to or theft of the vehicle or its contents, or
is to be printed with gray
any incidental or consequential damages caused by any failure or alleged failure of the product to function
properly. Under No Circumstances Should This Warranty, Or The Product Covered By It, Be Construed As A
scale front cover; this is a
Guarantee Or Insurance Policy Against Loss. The Company neither assumes nor authorizes any person or
organization to make any Warranties or assume any liability in connection with the sale, installation, or use of
place marker cover.
this product.
This device complies with FCC Rules part 15. Operation is subject to the following two conditions, (1) This
device may not cause harmful interference and, (2) This device must accept any interference that may be
received, including interference that may cause undesired operation.
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications
to this equipment. Such modifications could void the user's authority to operate the equipment.
2-Way Controller Transceiver
OPERATION GUIDE &
INSTALLATION MANUAL
10/02 MO/I_Echo
Omega
Echo
FRONT COVER
PRINTER'S NOTE:
production front cover
is gray scale; this is a
place marker cover.
COPYRIGHT 2002: OMEGA RESEARCH & DEVELOPMENT, INC.
Advertisement
Related Manuals for Omega Echo
Summary of Contents for Omega Echo
- Page 1 Company proves to be defective, the Company will repair or replace it free of charge within the first year and thereafter all parts to be repaired will be free with only a nominal charge for Omega Research and Development, Inc.'s labor and return shipping, to the original owner during the lifetime of the car in which it was originally BACK COVER installed.
- Page 2 THE OMEGA ECHO 2-WAY TRANSCEIVER INSTALLING THE ECHO TRANSCEIVER SYSTEM The Omega Echo transmits to and receives its signal from a remotely-mounted base re- “III” ceiver/transmitter unit which is plugged directly into the host security system module; no “II” Button other wiring connections are needed.
-
Page 3: Programming Echo To Security System
The siren will chirp once, confirming that the system learned the Echo or transmitter. system and displays a variety of system conditions on its LCD screen. The Echo also will chirp and play melodies, which emulate the security system’s siren. Your system can be operated by as many Step 4 Repeat the previous step for each Echo or transmitter which is to operate the system. - Page 4 Other Omega Echo Notes: indicate system status (all are seen in the • The system will only transmit a signal to the Echo transceiver if the Echo was last used to operate view at right). When the remote the system (as in Arming, Disarming, etc).
- Page 5 • The “2” within a circle indicates use of the 2nd Channel Output, which is most commonly used for point within the menu by simply not pressing any buttons for 12 seconds. The Echo chirps once a remote trunk release feature.
- Page 6 Press and release the button • The various lines at the upper rear of the vehicle graphic represent a unique Omega feature which Each press of the button changes the vehicle from Passenger Car, then allows the user to customize the vehicle type represented by the display. Options are: passenger car, to Pickup Truck, and then to Van/SUV.