Playback Procedure - JVC GY-DV300 Instruction Manual

PLAYBACK
The recorded picture can be viewed on the LCD screen or in the viewfinder.
The playback sound is not output from the monitoring speaker of the GY-DV300.

Playback Procedure

● In the VTR playback mode, no
camera image is displayed on
the LCD screen or the
viewfinder.
● The operation mode during VTR
playback is indicated on the
LCD screen and the viewfinder
screen.
P L AY
VTR operation
mode indicator Indicator
showing the
recording speed
mode at the time
of recording.
(SP/LP)
E-80
Playback of Tape
POWER switch
1.
Set the POWER switch to "ON".
2.
Set the MODE switch to "VTR".
● The GY-DV300 enters the VTR playback mode.
3.
Insert the recorded videocassette.
● The cassette tape is loaded, and the STOP mode is engaged.
4.
Press the BAR (f/ w) button.
● Playback starts.
5.
Press the BAR (f/ w) button again to stop playback temporarily.
● The unit enters the still mode (still picture shown).
6.
To re-start playback, press the BAR (f/ w) button.
7.
To stop playback or still mode, press the AW (a) button.
● The unit enters the STOP mode.
MODE switch
BAR (f/ w)
CAM-A
button
BAR
AW (a)
button
AW
FWD
(g)
button
FWD
REV (h)
button
REV
MODE
CAM-B
VTR