Td (Toner/Developer) Cartridge Replacement - Sharp AL-2061 Operation Manual

TD (TONER/DEVELOPER) CARTRIDGE REPLACEMENT

When toner is low, the error indicator will light up and "TD CARTRIDGE IS NEAR
EMPTY" will appear in the display. For information on purchasing a new TD
cartridge, see START GUIDE. If copying is continued while the indicator is lit, copies
will gradually become lighter until the toner runs out. When the toner runs out, the
machine will stop operating, the error indicator will blink, and "REPLACE THE TD
CARTRIDGE" will appear in the display. Follow the procedure below to replace the
TD cartridge.
During a long copy run of a dark original, "TONER REPLENISHMENT
IN PROGRESS" appears in the display, and the machine may stop even
though toner is left. The machine will feed toner up to 2 minutes and
then the ready indicator will light up. Press the [START] key (
resume copying.
1
Open the bypass tray, and
then open the side cover
while pressing the side
cover open button.
2
Push gently on both sides of
the front cover to open the
cover.
) to
161