Earlyref (Early Reflections) - Korg R3 Effect Manual

Effect guide
only MFX
Trim (Pre EQ Trim)
Sets the EQ input level.
LoEQGain (Low EQ Gain)
Sets the gain of Low EQ.
HiEQGain (High EQ Gain)
Sets the gain of High EQ.
only MFX
ER Level
Sets the time taken from the original sound to the first
early reflection. When used for the master effect, this is
displayed and can be set only if Room or BritRoom is se-
lected.
Rev Level (Reverb Level)
Sets the reverberation level. When used for the master
effect, this is displayed and can be set only if Room or
BritRoom is selected.
12
[000...127]
only MFX
[–15.0...+15.0dB]
only MFX
[–15.0...+15.0dB]
[000...127]
only MFX
[000...127]
12. EarlyRef
(Early Reflections)
This effect is only the early reflection part of a reverber-
ation sound, and adds presence to the sound. You can
select one of the four decay curves.
Wet: Mono In - Stereo Out / Dry: Stereo In - Stereo Out
Left
EQ Trim
IFX: High Damp
MFX: HEQ
+
Pre Delay
IFX: Low Damp
MFX: LEQ
EQ Trim
Right
Type [Sharp, Loose, Modulate, Reverse]
Selects the decay curve for the early reflection.
Sharp
Loose
Modulated
Reverse
Dry
Pre Delay
ER Time [IFX: 010...400msec/MFX: 010...800msec]
Sets the time from the original sound to the first early re-
flection. The range of this parameter will differ depend-
ing on whether the effect is an insert effect or a master
effect.
PreDelay [IFX: 000...100msec/MFX: 000...200msec]
Sets the time taken from the original sound to the first
early reflection. The range of this parameter will differ
depending on whether the effect is an insert effect or a
master effect.
Trim (Pre EQ Trim)
Sets the input level of EQ applied to the effect sound.
only MFX
LoEQGain (Low EQ Gain)
Sets the gain of Low EQ.
only MFX
HiEQGain (High EQ Gain)
Sets the gain of High EQ.
only IFX
HighDamp
Sets the damping amount in the high range.
only IFX
Low Damp
Sets the damping amount in the low range.
Dry / Wet
Early Reflections
Dry / Wet
Early Reflections - Type
ER Time
[000...127]
[–15.0...+15.0dB]
[–15.0...+15.0dB]
[000...100%]
[000...100%]