3.4 Lubrication
3.4.1 Lubricant
Fluoil G-943 (Kanto Chemical Industries Co., Ltd.)
3.4.2 Where to Lubricate
A. Platen bushings and the platen shafts (2 places each)
B. Gear shafts of the gear holder (2 places)
C. Sliding surface of the brake disc
D. Lock shaft parts of the lock lever-R/L (2 places on both sides)
(See the following figure.)
E. Sliding parts of the pressure arm-R/L (3 places on both sides)
(See the following figure.)
F. U-shaped grooves of the main chassis, where the platen bushings are engaged (2 places on both sides)
(See the following figure.)
G. Both ends of guide roller shaft
E
D
E
F
15
CBM1000 TYPE II Service Manual
E