Manual Tuning - Panasonic TH-42AS700A User Manual

When the operation is completed, the channel at the lowest position will
●
be displayed.
This setting is applicable only for the selected TV mode.
●
■
Auto Tuning using the buttons on the TV
1. Press and hold INPUT/OK/HOLD for MENU button for 3 seconds to
display the menu.
2. Set Auto Tuning with following control panel buttons.
Move the cursor / select from a range of options / select the menu item
●
(up and down only)
Access the menu / store settings after adjustments have been made or
●
options have been set with INPUT/OK/HOLD for MENU button

Manual Tuning

■
Digital TV
Normally use Auto Tuning
channels.
If tuning has not been done completely or for adjusting the direction of the
aerial, use this function.
All Digital TV channels found will be added to
●
1. Select physical channel with
2. Press OK to search.
■
Analogue TV
Set Analogue TV channel manually after
1. Select the channel position with
2. Select the channel with
3. Search with /
4. Select Store with
If a VCR is connected only with the RF cable, select channel position 0.
●
or Update Channel List
/ and select offset with
Auto
Numeric
Channel Up / Down.
.
/ and press OK
- 66 -
to retune Digital TV
Channel List.
Tuning.
buttons.
to set.
/ .