Basic/Ipv4 Settings - EnGenius Neutron EWS210AP User Manual

Basic
This page allows you to modify the device's IP settings and the Spanning Tree settings. Enabling the Spanning Tree
Protocol will prevent network loops in your LAN network.
IPv4 Settings
IP Network Settings
Select whether the device's IP address will use the static IP address specified or be obtained automatically when the
device connects to a DHCP server.
IP Address
Displays the IP address of this device.
IP Subnet Mask
Displays the IP Subnet mask of this device. A subnet is a logically visible subdivision of an IP network. A is mask used
to determine what subnet an IP address belongs to.
Gateway
Displays the Default Gateway of this device. Leave it blank if you are unsure of this setting.
Primary/Secondary DNS
Displays the primary/secondary DNS address for this device.
46