General Settings - EnGenius Neutron EWS210AP User Manual

General Settings

A) Enter the Device Name for the Access Point so that you can differentiate itself if you plan to use more than one AP.
B) Enter the Administrator acccount username and password to create an account that can access all features of the
AP. next, enter the password again for verification.
C) Select DHCP or Static to determine how IP addresses will be assigned for the AP:
- Select DHCP for an IP Address to be assigned automatically if there is a DHCP server in the network.
- Select Static to enter the IP Address, Subnet Mask, Gateway, and DNS Server manually.
Please refer to page 46 for more detailed information on General Settings. Click Apply to continue.
28