Programming the Unit
IP Address Mode
Determines whether the unit's IP address is assigned
automatically (DHCP) or manually (static).
•
If this setting is changed, the unit must be restarted
before the new setting becomes effective (see
page 47).
IP Address
Determines the unit's IP address.
•
This parameter is only available when "IP Address
Mode" is set to "Static".
•
If this setting is changed, the unit must be restarted
before the new setting becomes effective (see
page 47).
Subnet Mask
Set this parameter to match the IP address of the IP
network's subnet mask.
•
This parameter is only available when "IP Address
Mode" is set to "Static".
•
If this setting is changed, the unit must be restarted
before the new setting becomes effective (see
page 47).
Default Gateway
Set this parameter to match the IP address of the IP
network's default gateway.
•
This parameter is only available when "IP Address
Mode" is set to "Static".
•
If this setting is changed, the unit must be restarted
before the new setting becomes effective (see
page 47).
Protocol Settings
Consult your system administrator for the appropriate settings.
56
Operating Instructions
Description
Description
Description
Description
Available Settings
DHCP
Static
Available Settings
—
Available Settings
—
Available Settings
—
Default Setting
Static
Default Setting
192.168.0.2
Default Setting
255.255.255.0
Default Setting
0.0.0.0
Document Version
2010/02