Sip Settings - Panasonic KX-NT700 Operating Instructions Manual

SIP Settings

To use the unit as a SIP extension of the PBX, the unit
must be registered as a SIP extension through PBX
programming, the "Operation Mode" setting must be
set to "IP-PBX" (see page 28), and the following
settings must be set to match the settings of the PBX.
Consult your system administrator for the appropriate
settings. Refer to the PBX documentation to register the
unit as a SIP extension.
1.
Press [MENU].
2.
Select "Protocol Settings", then press
.
SELECT
3.
Select "SIP Ext. No.", then press
4.
Enter the unit's extension number (max. 32 digits),
then press .
SAVE
5.
Select "SIP Password", then press
6.
Press .
EDIT
7.
Enter the password (max. 32 characters), then
press [ENTER].
•
Press to switch between numeric and
CHAR
alphabet entry modes.
•
Press [ ] to change between uppercase and
lowercase character entry.
•
See page 38 and page 40 for information on
entering characters.
8.
Select "SIP User Domain Name", then press
.
SELECT
9.
Enter the IP address of the PBX, then press
.
SAVE
10.
Select "SIP Proxy Server IP Address", then
press .
SELECT
11.
Enter the IP address of the PBX, then press
.
SAVE
12.
Select "SIP Proxy Server Port Number",
then press .
SELECT
13.
Enter the SIP port number of the PBX or SIP proxy
server, then press
14.
Select "SIP Registrar IP Address", then
press .
SELECT
15.
Enter the IP address of the PBX, then press
.
SAVE
16.
Select "SIP Registrar Port Number", then
press .
SELECT
17.
Enter the SIP port number of the PBX or SIP
registrar server, then press
18.
Press [MENU].
Document Version 2010/02
SELECT
SELECT
.
SAVE
.
SAVE
Note
•
If this setting is changed, the unit must be
restarted before the new setting becomes
effective (see page 47).
•
To confirm the SIP extension number, press
[MENU]®"SIP Ext. No."®
.
.
Preparation
.
SELECT
Operating Instructions 27