Changing The Exposure Mode - Pentax 645D Operating Manual

e_kb487.book Page 47 Wednesday, December 8, 2010 9:49 AM

Changing the Exposure Mode

The following are the available exposure modes.
Exposure Mode
Automatically sets the shutter speed and aperture value
e according to Program Line.
Hyper-program You can use the front and rear e-dials to switch between
shutter priority and aperture priority.
K
You can set the desired sensitivity.
Sensitivity Priority
b
You can set the desired shutter speed.
Shutter Priority
c
You can set the desired aperture value.
Aperture Priority
L Automatically sets the sensitivity according to the set
Shutter & Aperture Priority shutter speed and aperture value.
a
You can set all settings.
Hyper-manual
p
Bulb shooting
Bulb
The shutter speed is locked at 1/125 seconds. Use this
M
when using a flash that does not automatically set the
Flash X-sync Speed
sync speed.
Lets you capture images with the previously-saved
A
User setting exposure mode and settings.
Memo
• Set Program Line on the control panel or in the [A2] menu.
• Set A in the [A4] menu.
Function
(z
(z p.R20)
EV Change Shutter
Compensation Speed
z z
×
z
z z
×
z
z z
z z
× ×
×
z
– –
p.R15)
(z: Available ×: Not available)
Change Change
Aperture Value Sensitivity
3
z z
Other than
×
AUTO
×
z
z z
AUTO only
z
Other than
z
AUTO
Other than
z
AUTO
Other than
z
AUTO
– –
47