Table of Contents
Advertisement
OFF
ON
Fig. 5
(2)
(7)
5
4
3
2
1
Fig. 6
(1)
(2)
(3)
(4)
5
4
3
2
1
Fig. 7
20
(4)
O
C
READY
O
F
TOP TEMP.
(3)
O
C
(5)
READY
O
F
BOTTOM TEMP.
6
7
8
(1)
9
10
O
C
READY
O
F
TOP TEMP.
O
C
READY
O
F
BOTTOM TEMP.
6
7
8
9
10
FEATURES GUIDE
A. POWER ON/ OFF: (Figure 5)
Located at the back left of the
machine applies power to the
laminator. The control panel display
will illuminate when position
marked "l" is pushed. The off
position, marked "O", removes
power from the laminator.
B. CONTROL PANEL INDICATORS:
(Figure 6)
1. POWER INDICATOR
Illuminates when the laminator is
plugged in and POWER ON/ OFF
is in the on, (I), position.
2. PRESSURE INDICATOR
Illuminates in increments to
correspond with the amount of
pressure at the main roller nip.
Pressure is represented by
pecent from 0 (minimal) to 100
(maximum).
3. READY INDICATOR: "READY"
Illuminates when the actual
temperature is equal to (+/- 5)
set temperature.
4.
O
C INDICATOR: "
Illuminates indicating the
displayed value is in degrees
Celcius.
O
(6)
5.
F INDICATOR: "
Illuminates indicating the
displayed value is in degrees
Farenheit.
6. ON INDICATORS
near the heater and cooling fan
on buttons. Illuminates when the
related on button is pressed.
7. SELECTION INDICATORS
Located near the start/ stop and
foward/ reverse buttons.
Illuminates when the selected
button is pressed.
C. CONTROL PANEL BUTTONS:
(Figure 7)
1. START
: When pressed,
indicator illuminates and
activates rollers for normal
operation.
2. STOP
: When pressed,
indicator illuminates and stops
the movement of the rollers.
3. REVERSE
: When pressed,
indicator illuminates and sets the
motor direction for reverse roller
movement to clear film jams and
wrap-ups.
4. FORWARD
: When pressed,
indicator illuminates and sets the
motor direction for forward roller
movement to run in normal
operation mode.
:
Preliminary
:
Copy
O
C"
O
F"
: Located
:
I
Advertisement
Table of Contents
