Preset 14; Presetting The Channels (Manual) - Sharp LC-15B2MA Operation Manual

Presetting the Channels (MANUAL)

Upper control panel
VOL CH MENU TV/VIDEO
2 PRESET
4 3
POWER
DISPLAY
MENU
SLEEP BRIGHT
MENU
TV/VIDEO
VOL(+)/(–)
VOL
CH
CH (
CHANNEL
SELECT
-/--
MPX
Upper control panel
VOL CH MENU TV/VIDEO
2 PRESET
4 1,2,3,5
I Setting a channel to a desired TV
station:
1
Press MENU (PRESET-1) on the
upper part of the LCD TV set for
1
more than two seconds. The
AUTO mode screen appears.
2
Press MENU (PRESET-1) to
1,2,6
display the MANUAL mode screen.
Press MENU (PRESET-1) again
to change the MANUAL mode as
shown below.
AUTO → MANUAL → LANGUAGE →
3
Select the channel position using
CHANNEL SELECT or
CH ( )/(
4
Press VOL (+)/(–) to locate the
channel you want to preset to the
position. Search is initiated and
when a TV signal is received
during the search, the search
stops.
5
Repeat steps 3 and 4 above, to
preset the channel positions for
other broadcasts, etc.
6
Press MENU (PRESET-1) to
return to the normal screen.
)/( )
Note:
• SYSTEM may not have been set correctly,
if noise can be heard or if there is no
sound.
In such case, reset to SOUND SYSTEM
using MENU.
I
In a weak reception area, or under
bad reception conditions.
1
Press MENU (PRESET-1) on the
upper part of the LCD TV set for
more than two seconds. The
AUTO mode screen appears.
2
Press MENU (PRESET-1) to
1 display the MANUAL mode screen.
3
While the MANUAL mode screen
is displayed, press MENU for more
than 2 seconds.
The channel position number
remains in green.
Note:
• While the MANUAL mode screen is
displayed, press MENU.
(The LANGUAGE mode screen will
appear.)
4
Adjust for good reception using
VOL (+)/(–).
5
After finishing the adjustment,
press MENU (PRESET-1) to
continue channel presetting.
PRESET (Continued)
NORMAL
SCREEN
).
Sound System
Auto mode screen
Manual mode screen
Channel position
number
LANGUAGE
ENGLISH
SELECT: EXIT:
MENU
15