Basic Operation; Turning On Power; Switching Tv/Video Av1/Av2/Component/Tv Mode - Sharp LC-15B2MA Operation Manual

BASIC OPERATION

Turning on POWER

Control section of main unit
MAIN POWER
Power/Standby indicator

Switching TV/VIDEO AV1/AV2/COMPONENT/TV Mode

POWER
DISPLAY
SLEEP BRIGHT
MENU
TV/VIDEO
VOL
CH
-/--
MPX
10
1
Press MAIN POWER, located on
the upper part of the main unit to
ON.
2
The POWER/STANDBY indicator
instantaneously changes from red
to green and the main unit is turned
on.
Note:
• Input mode indication disappears after
several seconds.
1
Turn on the power of the con-
nected video equipment.
2
Press TV/VIDEO and select the
applicable input source. The screen
POWER
displays AV1, AV2, COMPONENT
or TV mode at the upper right
corner each time TV/VIDEO is
pressed.
TV/VIDEO
Note:
• AV input mode indication remains for
five seconds.
• AV1: Video equipment connected to the
AV1 input terminals.
An S-video input terminal is
additionally provided for the AV1
input. If both S-video terminal and
normal video terminals are
connected with cables, the S-
video input terminal is selected as
the high priority.
• AV2: AV2 mode is used to adjust the
preset settings and IN or OUT can
be selected. AV2 indication is not
displayed when OUT is selected.
(For details on setting AV-OUT,
see page 21.)
• COMPONENT:
Video equipment connected to the
COMPONENT input terminals.
M On-Screen Display
AV1 mode
B / G
AV2 mode
B / G
COMPONENT mode
C O M P O N E N T
TV mode
B / G
B / G