Table of Contents
Advertisement
After preset has been performed
The following features are available for preset channels:
@ Fine Tuning
When a preset programme
channel is not exactly tuned, you can
fine tune the channel in this mode.
1. Select the programme channel number you want to tune using
the 0 ~ 9 digit button or the channel selector (CHV / CH A)
buttons.
2. Press the MENU button @ to see the MAIN Menu.
3. Press the Cursor
UP
button
A to select
«INSTALL
AND
TUNE».
4. Press the MENU button @ to see the INSTALLATION Menu.
5. Press the Cursor DOWN button VW to select FINE TUNE.
6. Adjust the picture with the Cursor LEFT/RIGHT
buttons </p>
for the best picture quality.
7. Press GREEN button to memorize.
8. Press the TV button @ to clear the on-screen display.
9. Repeat the above procedure for other programme channels as
required.
Mode
This feature allows you to select TV, VCR, SKIP. First follow the
above steps 1, 2, 3 and 4. The INSTALLATION
Menu will appear
on screen.
5. Press the Cursor DOWN button W to select MODE.
6. Press the Cursor RIGHT button » to open the MODE Menu.
7. With Cursor UP/DOWN buttons A/¥ select:
TV:
If the TV signal is weak the image can shake.
In this case put it in TV mode.
VCR: In some case, the upper part of the picture may be distorted
when receiving signals from a VCR_
via the RF terminal on
the TV set.
This feature may improve the picture quality for these cases.
SKIP: Allows you to skip channels you do not want to view when
using channels selector (CHV / CH A\) buttons.
8. Press the GREEN button to memorize.
9. Press the TV button @ to clear the on-screen display.
10. Repeat the above procedures for other programme channels
as required.
PICTURE
ADJUSTMENTS
AUDIO
ADJUSTMENTS
|
SET OTHER
FUNCTIONS
hlue >
|
INSTALL
AND TUNE
blue >
CHANNEL
CH
Pr 05
cc
Ch 05
SEARCH
F-TUNE
|
blue 3
MEMORIZE
F-TUNE
MODE
blue >
EDIT
AUTO
MEMORIZE
|
blue >
ENGL
Advertisement
Table of Contents
