HP EliteBook 2170p Maintenance And Service Manual page 98
Notebook pc
Hide thumbs
Also See for EliteBook 2170p:
- Getting started manual (54 pages) ,
- Specification (29 pages) ,
- Quickspecs (28 pages)
Table of Contents
Advertisement
2.
Lift the rear edge of the system board (2) and swing it up and forward until it rests upside down in
front of the computer.
3.
Release the ZIF connector to which the TouchPad cable is connected, and then disconnect the
TouchPad cable (1) from the system board.
4.
Release the ZIF connector to which the Smart Card reader board cable is connected, and then
disconnect the Smart Card reader board cable (2) from the system board.
5.
Remove the system board.
Reverse this procedure to install the system board.
90
Chapter 4 Removal and replacement procedures
Hide quick links:
Advertisement
Table of Contents
