Insert A Microsd Card; Remove The Microsd Card; Connect A Usb Data Cable - Nokia C3 User Manual

8 Get started
Do not connect products that create an
output signal as this may cause damage
to the device. Do not connect any voltage
source to the Nokia AV Connector.

Insert a microSD card

Use only compatible microSD cards
approved by Nokia for use with this
device. Nokia uses approved industry
standards for memory cards, but some
brands may not be fully compatible with
this device. Incompatible cards may
damage the card and the device and
corrupt data stored on the card.
Your phone supports microSD cards with
a capacity of up to 8 GB.
A compatible memory card may be
supplied with the device, and may already
be inserted in the device. If not, do the
following:
Cyan Cyan Magenta Magenta
1 Open the cover of the memory card
slot.
2 Insert the card into the memory card
slot with the contact surface facing
up, and press until it locks into place.
3 Close the cover of the memory card
slot.

Remove the microSD card

Important: Do not remove the memory
card during an operation when the card is
being accessed. Doing so may damage the
memory card and the device, and corrupt
data stored on the card.
You can remove or replace the memory
card during phone operation without
switching the device off, but you need to
ensure that no application is currently
accessing the memory card.

Connect a USB data cable

Connect a compatible USB data cable to
the USB connector. You may need to
purchase a USB data cable separately.
Yellow Yellow Black Black