Troubleshooting - Hotpoint EG 900 X S Operating Instructions Manual

The time can also be changed in the following two ways:
GB
1. Repeat all of the foregoing steps.
2. Press the
buttons to reset the time.
Manual Operation Mode for the Oven
After the time has been set, the programmer is automatically
set to manual mode.
Note: Press the
mode after every "Automatic" cooking session.
Delayed Start Time with Preset Cooking Length
The length and the end cooking times must be set. Let us
suppose that the display shows 10:00.
1. Turn the oven control knob to the cooking setting and
temperature desired (example: convection oven at 200°C).
2. Press the and the use (within 4 seconds) the
buttons to set the length of the cooking time. Let us
suppose that 30 minutes was set for the length of the
cooking time. In this case, the display will show:
Release the button, and within 4 seconds, the current time
will reappear with the
3. Press the button, and then use the
to set the end cooking time. Let us suppose that it is 13:00
4. Release the button and the display will show the current
time within 4 seconds:
When "auto" is lighted, it indicates that the length and end
cooking time have been preset to operate in automatic mode.
At this point, the oven will turn on automatically at 12:30 in
order to finish the cooking session within 30 minutes. When
the oven is on, the
the display for the entire length of the cooking process. The
button can be pressed at any time to display the setting
for the length of the cooking time, while the
be pressed to display the end cooking time.
At the end of the cooking time, an acoustic signal will
sound. Press any button it turn it off (except the
buttons).
Immediate Start Time with Preset Cooking Length
When only the length of the cooking time is set (points 1 and
2 of the paragraph entitled, "Delayed Start Time with Preset
Cooking Length"), the cooking session starts immediately.
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
10
button, and then use the
button to return the oven to manual
symbol and "auto."
and
symbol (cooking pot) will appear on
button can
Cancelling a Preset Cooking Time
Press the button, and use the
and
Then press the manual cooking mode button
Timer Feature
The timer can be used to count down from a given length
of time. This feature does not control when the oven comes
on or turns off, but, rather, it only emits an acoustic signal
when the preset time has run out.
Press the button, and the display will read:
and
Then use the
Release the button, and the timer will start at that second.
The display will show the current time.
At the end of the preset time, an acoustic signal will sound,
which can be turned off by pressing any button (except the
and buttons), and the
buttons
Changing and Cancelling Settings
• The settings can be changed at any time by pressing the
corresponding button and using the
• When the length setting for the cooking time is cancelled,
the end cooking time setting is also cancelled, and vice
versa.
• When in automatic cooking mode, the appliance will not
accept end cooking times prior to the start cooking time
proposed by the appliance itself.
Buzzer volume control
Once you have made and confirmed the clock settings, use
button to adjust the volume of the alarm buzzer.

Troubleshooting

It may occur that the appliance does not function or does
not function properly. Before calling customer services for
assistance, let's see what can be done.
and
First of all, check to see that there are no interruptions in
the gas and electrical supplies, and, in particular, that the
gas valves for the mains are open.
The burner does not light or the flame is not uniform
around the burner.
Check to make sure that:
• The gas holes on the burner are not clogged;
• All the removable parts that make up the burner are
mounted correctly;
• There are no draughts around the cooking surface.
button to set the time to:
and buttons to set the desired time.
symbol will turn off.
or
.
button.