Making/Answering Calls; Making Calls; Answering Calls - Panasonic KX-TG8162AL Operating Instructions Manual

Making calls

1
Lift the handset and dial the phone
number.
R To correct a digit, press
2
Press M N or
3
When you finish talking, press M
place the handset on the base unit or
charger.
Using the speakerphone
1
Dial the phone number and press M N.
R Speak alternately with the other party.
2
When you finish talking, press M
Note:
R For best performance, use the
speakerphone in a quiet environment.
R To switch back to the receiver, press M N/
M N.
Adjusting the receiver or speaker
volume
Press MDN or MCN repeatedly while talking.
Making a call using the redial list
The last 10 phone numbers dialled are stored
in the redial list (each 24 digits max.).
1
(right soft key) or MEN (T)
2
MbN: Select the desired phone number.
3
M N
Erasing a number in the redial list
1
(right soft key) or MEN (T)
2
MbN: Select the desired phone number.
a
3
MbN: "Yes" a
Pause (for PBX/long distance service
users)
A pause is sometimes required when making
calls using a PBX or long distance service.
.
.
N or
N.
a M N

Making/Answering Calls

When storing a calling card access number
and/or PIN in the phonebook, a pause is also
needed (page 22).
Example: If you need to dial the line access
number "0" when making outside calls with a
PBX:
1
0 a
2
Dial the phone number. a M
Note:
R A 3 second pause is inserted each time
is pressed.

Answering calls

When a call is being received, the smart
function indicator flashes rapidly.
1
Lift the handset and press M
when the unit rings.
R You can also answer the call by
pressing any dial key from 0 to 9,
*, or #. (Any key answer feature)
2
When you finish talking, press M
place the handset on the base unit or
charger.
Using the smart function key
When the smart function indicator flashes
rapidly, press MSmart functionN.
R You can answer the call even if the handset
is placed on the base unit or charger
(page 15).
You can finish talking by pressing M
without lifting up the handset.
Auto talk
You can answer calls simply by lifting the
handset off the base unit or charger. You do
not need to press M
on, see page 27.
Adjusting the handset ringer volume
n While the handset is ringing for an
incoming call:
Press MDN or MCN repeatedly to select the
desired volume.
N
N or M N
N
N. To turn this feature
N or
17