Draytek Vigor2710 Series User Manual page 41

Item
LAN Status
WAN Status
ADSL Information
Description
Primary DNS-Display the primary DNS server address for
WAN interface.
Secondary DNS -Display the secondary DNS server
address for WAN interface.
IP Address-Display the IP address of the LAN interface.
TX Packets-Display the total transmitted packets at the
LAN interface.
RX Packets-Display the total received packets at the LAN
interface.
Enable – Yes in red means such interface is available but
not connected. Yes in green means such interface is
connected.
Line – Display the physical connection of this interface.
Name – Display the name of the router.
Mode - Display the type of WAN connection (e.g., PPPoE).
Up Time - Display the total uptime of the interface.
IP - Display the IP address of the WAN interface.
GW IP - Display the IP address of the default gateway.
TX Packets - Display the total transmitted packets at the
WAN interface.
TX Rate - Display the speed of transmitted octets at the
WAN interface.
RX Packets - Display the total number of received packets
at the WAN interface.
RX Rate - Display the speed of received octets at the WAN
interface.
ATM Statistics – Display the ATM layer information.
TX Cells –Display the total number of ATM transmission
cells.
RX Cells –Display the total number of ATM received cells.
TX CRC errs – Display the total number of transmission
CRC errors.
RX CRC errs –Display the total number of CRC errors
received.
ADSL Status –Display the ADSL layer information.
Mode – Display the type of ADSL mode, such as T1.413,
G.DMT, ADSL2+(G.992.5), and so on.
State – Display the ADSL connection status, such as
Ready, HANDSHAKING, SHOWTIME and so on.
Up Speed – Display the upstream rate.
Down Speed – Display the downstream rate.
SNR Margin – Display number of SRR Margin.
Loop Att .- Display the number of Loop Attenuation.
31
Vigor2710 Series User's Guide