Draytek Vigor2710 Series User Manual page 303

SNMP Setup
Click OK to save these settings.
F o r I P v 6
F o r I P v 6
Available settings are explained as follows:
Item
Management Access
Control
Access List
numbers for the Telnet, HTTP and FTP servers.
Default Ports - Check to use standard port numbers for the
Telnet and HTTP servers.
Enable SNMP Agent - Check it to enable this function.
Get Community - Set the name for getting community by
typing a proper character. The default setting is public.
Set Community - Set community by typing a proper name.
The default setting is private.
Manager Host IP - Set one host as the manager to execute
SNMP function. Please type in IP address to specify certain
host.
Trap Community - Set trap community by typing a proper
name. The default setting is public.
Notification Host IP - Set the IP address of the host that will
receive the trap community.
Trap Timeout - The default setting is 10 seconds.
Description
Enable the checkbox to allow system administrators to login
from the Internet. There are several servers provided by the
system to allow you managing the router from Internet.
Check the box(es) to specify.
Enable PING from the Internet -
enable all PING packets from the Internet. For security issue,
this function is disabled by default.
You could specify that the system administrator can only
293
Check the checkbox to
Vigor2710 Series User's Guide