Remote Viewing Using A Web Browser - Lorex LNE3003 Instruction Manual

Remote Viewing using a Web browser

To access your device remotely from a web browser:
1. In your browser, go to
password. Click Yes in the security pop-up window.
2. Under My Stuff, click the camera you want to view.
3. Enter you username and password (by default, admin) to login to your camera.
Figure 5.0 Remote viewing in your Web browser
Note: You may need to install Quicktime for the Yoics™ site. If you have not installed the
QuickTime plug-in, your browser will prompt you to do so now
(www.apple.com/quicktime/download).
If you have an external (WAN) static IP address or you have registered with the
Note:
free LOREX DDNS service, you can configure your router to port-forward the incoming
Internet
connections to the camera. Use the static IP address or your customized lorexddns.net
URL in the address field of your browser to access your camera. Yoics registration is not required
when using this option. Please refer to the DigiConsole & DigiViewer Software Manual
for more information on DDNS setup and port forwarding.
ATTENTION: As a security measure, using Yoics™ remote viewing (PC or mobile) from
one location will disable the option to use the same Yoics™ ID from a different remote
location for approximately 30 minutes.
http://lorex.yoics.com
Setting up Yoics™ Remote Viewing
and log in using your username and
ATTENTION: You will be able
to view live video for 5~10
minutes then the connection
will drop. To refresh the
connection, click the camera
icon again.
19