Configuring Raid With The Intel Utility - HP Z230 Maintenance And Service Manual

Configuring RAID with the Intel utility

Follow these steps to create RAID volumes.
1. Press ctrl+i,
arrow keys and the space bar to navigate and select options.
NOTE:
2. Select Create RAID Volume,and then press enter.
3. Type the a name for the RAID volume in the Name field, and then press tab.
4. Select a level in the RAID Level field, and then press tab.
5. If three or more hard drives are installed, complete the following steps:
a. Press
b. Select individual physical members of the volume.
c. Press
box.
6. If appropriate, select a size in the Stripe Size field, and then press tab.
7. Enter the desired volume size in the Capacity field, and then press tab.
8. Press enter
9. When the warning message appears, press
10. Select 6 > Exit, then press enter.
11. Press Y
when prompted, to enter the Intel Rapid Storage Technology utility (RST). Use the
If only one hard drive is attached, the utility does not open.
enter to display the Select dialog box.
enter to exit the Select dialog box and to return to the Create Volume Menu dialog
to initiate volume creation.
to confirm the exit.
Y to create the volume.
Configuring Intel SATA RAID 111