Sharp MX-5500N Manual page 126

Proof Copy
Colour Mode
Output
7
• To change the number of sets printed, set the desired number of copies (sets) with the numeric keys. After changing
the number of sets, touch the [End] key in the touch panel (not the [START] key) to print the sets.
• Special modes that can be adjusted are Margin Shift, Pamphlet Copy, Tandem Copy, Covers/Inserts, Transparency
Inserts, Multi-Shot, and Stamp.
• For Pamphlet Copy, Covers/Inserts, and Multi Shot, only changes to the settings of the functions can be made; the
functions cannot be newly added or deleted.
• For Transparency Inserts, settings can be changed and the function can be newly added; however, when the
function has been previously selected, it cannot be cancelled.
8
Press [End] to continue.
To make a proof copy again, press
[Start].
9
To cancel scanning and copying...
Press the [STOP] key (
If Proof Copy is executed while the machine is printing another job, the other job is interrupted and the proof copies are
printed. The previous job will resume after the proof copies are printed.
If the [End] key is touched to execute printing of the remaining sets while the machine is printing another job, the remaining
sets will be printed after all previously reserved jobs are completed.
OK
Paper Select 2-Sided Copy
Special Modes
or
Change End
).
Change the settings.
(1) Touch the key of the setting that you want
to change.
The setting screen of the touched key opens. Change the
settings and touch the [OK] key.
(2) Touch the [OK] key.
Press the [COLOUR START] key (
or the [BLACK & WHITE START] key (
One set of copies is printed again using the adjusted settings.
Check the results. If further adjustments are needed, repeat
steps 6 through 8. (Repeating Proof Copy does not decrease
the remaining number of sets to be printed.)
Touch the [End] key.
You will return to the base screen of copy mode and the
remaining sets will be printed.
126
)
).