Service Bulletin Jbl 2001-07 - JBL PowerBass PB12 Service Manual

Powerbass series
Hide thumbs Also See for PowerBass PB12:
Table of Contents

Advertisement

Service Bulletin JBL2001-07 - November 2001
To:
All JBL Service Centers
Model: PB12
Subject: Possible Missing Diode D4
In the event you receive a PB12 subwoofer for any servicing reason, check for the presence
of diode D4 on the Main PCB close to the Power Amp Module (see illustration). If D4 is missing
or has been "cut out" of the circuit, it should be replaced; add JBL part# 50115. Observe
polarity.
Note: The presence or absence of D4, in itself, does not contribute to, or solve, an amplifer failure.
Purpose of D4 is to reduce the possibility of an occasional Turn-OFF pop noise.
Reference for general location only; all parts or designators may not conform exactly to this drawing.
JBL Incorporated
Service Bulletin
250 Crossways Park Dr. Woodbury, New York 11797
This is considered a Minor repair
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents