JBL PowerBass PB10 Owner's Manual

JBL PowerBass PB10 Owner's Manual

Powerbass series
Hide thumbs Also See for PowerBass PB10:

Advertisement

S P E C I F I C A T I O N S
Amplifier
Power (RMS):
Driver:
Inputs:
Outputs:
Low-Pass
Frequency:
High-Pass
Frequency:
Frequency
Response:
Dimensions
(H x W x D):
Weight:
Occasional refinements may be made to existing products without notice,
but will always meet or exceed original specifications unless otherwise
stated.
* Trademarks of Dolby Laboratories.
DTS is a registered trademark of Digital Theater Systems, Inc.
O W N E R ' S G U I D E
PowerBass
P R O D U C T L I N E :
PB10, PB12
M O D E L
N U M B E R :
D E S I G N G O A L : Bring the thrill of live performance and movie sound to
the home environment by calling on JBL's professional engineering leadership.
W O O F E R T Y P E : Pure cellulose fiber
P O R T D E S I G N : FreeFlow™ flared
P R O F E S S I O N A L R E F E R E N C E : Cinema Loudspeaker Series
PB10
150 Watts
10" Pure-Cellulose Fiber
Line Level (switchable to LFE)
and Speaker Level with
gold-plated 5-way binding posts
Speaker Level, High-Pass with
gold-plated 5-way binding posts
Continuously variable
from 50Hz – 150Hz
150Hz when using
speaker-level output
27Hz – low-pass
crossover setting
14" (16" with feet) x 14" x 15"
356mm (406mm with feet) x
356mm x 381mm
35 lb/15.9kg
Series
JBL Consumer Products
250 Crossways Park Drive, Woodbury, NY 11797
8500 Balboa Boulevard, Northridge, CA 91329
800-336-4JBL (4525) (USA only)
www.jbl.com
© 2001 JBL, Incorporated. JBL is a registered trademark
of JBL, Incorporated.
Part No. 338129-001
PB12
250 Watts
12" Pure-Cellulose Fiber
Line Level (switchable to LFE)
and Speaker Level with
gold-plated 5-way binding posts
Speaker Level, High-Pass with
gold-plated 5-way binding posts
Continuously variable
from 50Hz – 150Hz
150Hz when using
speaker-level outputs
25Hz – low-pass
crossover setting
15-1/2" (17-1/2" with feet) x 15" x 16"
394mm (445mm with feet) x
381mm x 406mm
40 lb/18.2kg
P R O S O U N D
C O M E S H O M E

Advertisement

Table of Contents
loading

Summary of Contents for JBL PowerBass PB10

  • Page 1 D E S I G N G O A L : Bring the thrill of live performance and movie sound to the home environment by calling on JBL’s professional engineering leadership. W O O F E R T Y P E : Pure cellulose fiber P O R T D E S I G N : FreeFlow™...
  • Page 2 D E S I G N G O A L : Bring the thrill of live performance and movie sound to the home environment by calling on JBL’s professional engineering leadership. W O O F E R T Y P E : Pure cellulose fiber P O R T D E S I G N : FreeFlow™...
  • Page 3: R E A D T H I S

    R E A D T H I S ! CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: To prevent electric shock, do not remove the grounding plug on the power cord, or use any plug or extension cord that does not have a grounding plug provided.
  • Page 4: Speaker Placement

    S P E A K E R C O N N E C T I O N When we designed the PB10 and PB12 powered subwoofers, our goal was to offer the user the best...
  • Page 5: Dolby Pro Logic (Non-Digital) - Line Level

    IMPORTANT: Make sure that the LFE toggle switch on the subwoofer is in the “Normal” position. Do not RECEIVER Subwoofer use the “LFE” position with Dolby Pro Logic-only processors.
  • Page 6: Dolby Digital Or Dts (Or Other Digital Surround Mode) Connection

    Output/LFE then you may connect the subwoofer output on your receiver/preamplifier to either the left or right line-level input on the subwoofer. It makes no difference which jack you choose. Connect each speaker to the corresponding speaker terminals on your receiver or amplifier.
  • Page 7: Power/Level Control/Crossover Adjustments

    Note: It will take several minutes for the LEDs to turn from green to red after the input signal to the subwoofer is removed. Due to JBL’s unique, high-output, high- efficiency amplifier design, room size, subwoofer placement, type of main speakers and listener position.
  • Page 8: Phase Control

    “Speaker Inputs” have the correct polarity (+ and –). • Make sure that the subwoofer is plugged into an active electrical outlet and switched on. • Adjust the crossover point. • Flip the Phase Control switch to the opposite position.

This manual is also suitable for:

Powerbass pb12

Table of Contents