Table of Contents
Advertisement
Connection the Double Oven Mains Cable
Important! This oven must be connected to the mains power supply only by a suitably qualified person.
Unscrew the screws A securing the cover plate B behind the oven (fig. 36).
– Remove the cover plate B.
– Remove the screws C from the cable clamp (fig. 37).
– Insert the mains cable (type H05RR-F or H05VV-F - 3x2,5 mm
– Connect the phase and earth cables to the mains terminal connection block D.
EARTH
N
NEUTRAL
L
LIVE
– Refit the cable clamp so that it clamps the outer sleeving of the cable, and screw the screws C.
– Refit the cover plate B and fix it with the screws A.
WARNING: This appliance must be earthed
Appliance Servicing
CDA provide a quality and effective after-sales service to cover all your servicing needs.
Please attach your receipt to this page for safekeeping.
Please help us to help you by having the following information available when booking a service-call:
Model type, make and model – see the product data plate.
1.
Evidence of installation / purchase date.
2.
Retailer where appliance was purchased.
3.
Clear and concise details of the fault.
4.
Full address including postcode and any contact phone numbers.
5.
Contact Telephone Numbers
CDA Customer Care Department
Telephone: 01949 862012
•
Fax: 01949 862003
•
Email: customer.care@cda.eu
•
2
section) into the cable protector P.
A
Brown (Live)
Blue (Neutral)
B
Fig. 36
P
C
D
Green
&
Yellow
(Earth)
Fig. 37
35
Advertisement
Table of Contents
