Stereo Adjustment; Focus Adjustment; Geometry - Daewoo DTH-25G1FST/FSP/FS Service Manual

ALIGNMENT INSTRUCTIONS
2) Select the S10 of service m ode to display item s, then press the
 
3) Press CH buttons on the remote control to select S M ANUAL and press
 
4) Press CH buttons on the rem ote control to select IN PUT LEVE L and press
becom e 490m V(+20m V/-5m V).
5) Press the R ECALL button of rem ote control to store.
INPUT LE VEL 15
INPUT LEVEL 15
W IDEB AND
WIDEBAND SPEC TRAL
SPECTRAL

5. STEREO ADJUSTMENT

1) R eceive the Zenith M TS signal of 1KH z CH(L only).
2) C onnect scope at TP2 to verify Rout correspondent.
3) Select the S10 of service m ode to display item s, then press the
 
4) Press CH buttons on the remote control to select S M ANUAL and press
 
5) Press CH buttons on the remote control to select WIDEBAND and press
 
6) Adjust w ith VOL
 
7) Press CH buttons on the remote control to select SPECTRAL and press
 
8) Adjust w ith VOL
9) Press the RECALL button on the rem ote control to store.
INPUT LEVEL 15
INPUT LEVEL 15
W ID EBAND
SP ECTRAL
WIDEBAND 23
SPECTRAL

6. FOCUS ADJUSTMENT

1) Receive the R ETM A PATTER N signal.
2) Adjust the FOC US VO LUM E of FBT to obtain the clearest picture

7. GEOMETRY

7-1. VERTICAL CENTER ADJUSTMENT
1) Receive the R ETM A PATTER N signal.
2) Set the user control AUTO P ICTUR E to STA NDARD m ode.
3) Select the S6 of service m ode to display item s, then press the
23
23 32
32
buttons till the Rout(scope) becom e m inim um .
buttons till the Rout(scope) becom e m inim um .
23
32
32
 
V OL buttons on the rem ote control.

VOL
 
V OL buttons on the rem ote control.

VOL

VOL

VOL
 
VO L buttons on the rem ote control.


buttons on the remote control.
 
VOL buttons to set TP2

buttons on the remote control.

Buttons on the remote control.

Buttons on the remote control.