Sub-Bright Adjustment; Pip Data Adjustment - Daewoo DTH-25G1FST/FSP/FS Service Manual

4) Adjust the R.G.B B IAS and G.B DR IVE, with
m eet with the CENTER LED of each m easuring instrum ent.
5) At this tim e, the memorized coordinates of the white balance tester, unless otherwise specified, use above coordinates
and color temperature(9600°K 265X295).
6) Press the RE CALL button on the rem ote control to store.
G D RIVE
G DRIVE
B DR IVE
B DRIVE
R CU T
B CU T
G C UT

9. SUB-BRIGHT ADJUSTMENT

1) R eceive the RETM A PATTERN signal.
2) Set the user control AU TO PICTU RE to STANDARD m ode.
3) Select the S9 of service m ode to display item s, then press the
 
4) Press CH buttons on the rem ote control to select BRIG HTNESS and press
control to adjust Sub bright level in order that the gradation pattern m ay serve 18% of BRIGHTN ESS.
5) Press the RECALL button on the rem ote control to store.
DP ADJUST
DP ADJUST
BRIG NTNESS
CONTR AST
BRIGNTNESS
COLOR
CONTRAST
TINT
COLOR
TINT

10. PIP DATA ADJUSTMENT

1) Select the S7 of service m ode to display item s, then press the
2) Adjust PIP sub data.(TINT : 057, Y DELAY : 00, SYNC DELAY : 15, VSIDEL : 06, VSPDE L : 00)
3) Press the RECALL button on the rem ote control to store.
PIP TINT
PIP TINT
H POS
V POS
H POS
Y DELAY
V POS
SYN C DE LAY
VSIDEL
Y DELAY
VSP DEL
SYNC DELAY

VOL
061
061
070
070
127
060
087
32
14
32
20
14
45
20
45
057
057
146
032
146
00
032
15
06
00
00
15

buttons, in order that R.G .B of the High and Low BEAM m ay
 
V OL buttons on the rem ote control.
 
VO L buttons on the rem ote control.

ALIGNMENT INSTRUCTIONS
 
VOL buttons on the rem ote