Shutdown And Startup Problems - Fujitsu Lifebook E752 User Manual

Problem
Your notebook will not work
on battery alone.
(continued)
The batteries seem to
discharge too quickly.

Shutdown and Startup Problems

The Suspend/Resume but-
ton does not work.
The system powers up, and
displays power on informa-
tion, but fails to load the
operating system.
Possible Cause
Battery is improperly
installed.
Your installed batteries are
faulty.
You are running an applica-
tion that uses a lot of power.
The power savings features
may be disabled.
The brightness is turned all
the way up.
The batteries are old.
Batteries were exposed to
high temperatures.
The batteries are too hot or
too cold.
There may be application
software conflict
Suspend/Resume button is
disabled.
You have a secured system
requiring a password to load
your OS.
Hard drive was not detected.
Possible Solutions
Verify that the batteries are properly connected by re-installing them.
Verify the battery conditions using the Status Indicator panel and replace or
remove any batteries that are shorted. See "Status Indicator Panel" on page 22.
Use both the primary battery and an optional second battery and/or use a power
adapter for this application when at all possible.
Check the Power Options menu settings and adjust according to your operating
needs.
Turn down the brightness adjustment. The higher the brightness the more
power your display uses.
Replace the batteries.
Replace the batteries.
Restore the notebook to normal operating temperature. Charging icon on the
Status Indicator panel will flash when battery is outside of operating range.
Close all applications and try the button again.
Enable the button by going to the Control Panel -> Power Options and clicking
on "Choose what the power button does".
Make sure you have the right password. Enter the setup utility and verify the
Security settings and modify them as accordingly. See "BIOS Setup Utility" on
page 51.
Use the BIOS setup utility or Primary Master submenu, located within the Main
menu, to try to auto detect the internal hard drive.
94 - Troubleshooting