Shutdown And Startup Problems - Fujitsu LifeBook T4310 User Manual

Problem Possible Cause

Shutdown and Startup Problems

The Suspend/Resume Suspend/Resume
button does not work. button is disabled.
There may be application
software. conflict
The system powers up, The boot sequence settings
and displays power on of the setup utility are not
information, but fails to compatible with your configu-
load the operating system. ration.
You have a secured system
requiring a password to load
your operating system.
Internal hard drive was
not detected.
An error message is dis- Power On Self Test (POST)
played on the screen dur- has detected a problem.
ing the Tablet PC (boot)
sequence.
Your Tablet PC appears to BIOS setup changes were not
change setup parameters saved when made and you
when you start it. exited the setup utility.
The BIOS CMOS hold-up bat-
tery has failed.
Your system display won't You have installed the Life-
turn on when the system is Book/Security Application
turned on or has resumed. panel.
Possible Solutions
Enable the button by going to the Control Panel -> Power
Options Properties and clicking on the Advanced tab. In the
Power buttons area, select the "Change what the power but-
ton does" option.
Close all applications and try the button again.
Set the operating source by pressing the [ESC] key while the
Fujitsu logo is on screen or use the [F2] key and enter the
setup utility and adjust the source settings from the Boot
menu. See "BIOS Setup Utility" on page 72.
Make sure you have the right password. Enter the setup util-
ity and verify the Security settings and modify them as
accordingly. See "BIOS Setup Utility" on page 72.
Use the BIOS setup utility or Primary Master submenu,
located within the Main menu, to try to auto detect the inter-
nal hard drive.
See the Power On Self Test (POST) messages to determine
the meaning and severity of the problem. Not all messages
are errors; some are simply status indicators. See "Power On
Self Test Messages" on page 118.
Make sure you select Save Changes And Exit when exiting
the BIOS setup utility.
Contact your support representative for repairs. This is not a
user serviceable part but has a normal life of 3 to 5 years.
Check the Status Indicator Panel for presence of the Security
icon. If it is visible, enter your password See "Status Indicator
Panel" on page 30.
114 - Troubleshooting