Fujitsu LIFEBOOK E751 Operating Manual
  1. Manuals
  2. Brands
  3. Fujitsu Manuals
  4. Laptop
  5. Lifebook E751
  6. Operating manual

Fujitsu LIFEBOOK E751 Operating Manual

Hide thumbs Also See for LIFEBOOK E751:
Table of Contents

Advertisement

Quick Links

See also: User Manual
System
Operating Manual
LIFEBOOK E751

Advertisement

Table of Contents
loading

Related Manuals for Fujitsu LIFEBOOK E751

Summary of Contents for Fujitsu LIFEBOOK E751

  • Page 1 System Operating Manual LIFEBOOK E751...
  • Page 2 For automatic driver updates, go to: "http://support.ts.fujitsu.com/com/support/index.html" Should you have any technical questions, please contact: • our Hotline/Service Desk (see Service Desk list or visit: "http://ts.fujitsu.com/support/servicedesk.html") • Your sales partner • Your sales office We hope you really enjoy using your new Fujitsu system.
  • Page 4 Brand names may be protected trademarks of the respective manufacturer and/or protected by copyright. Use of these by third parties for their own purposes may constitute an infringement of the holders’ rights. Further information can be found at "http://ts.fujitsu.com/terms_of_use.html" Order No. Fujitsu Technology Solutions GmbH: A26391-K326-Z320-1-7619, edition 1...
  • Page 5 LIFEBOOK E751 Operating Manual Innovative technology Ports and operating elements Important notes First-time setup of your device Working with the notebook Security functions Connecting external devices Removing and installing components during servicing Settings in BIOS Setup Utility Troubleshooting and tips Technical data Manufacturer’s notes...
  • Page 6 All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged. Copyright © Fujitsu Technology Solutions GmbH 2011 All rights reserved, including rights of translation, reproduction by printing, copying or similar methods, in part or in whole.

  • Page 7: Table Of Contents

    Using the power-management features ........... 40 Fujitsu Technology Solutions...
  • Page 8 Connecting external audio devices ............70 Fujitsu Technology Solutions...
  • Page 9 Declarations of Conformity ............. . . 90 Fujitsu Technology Solutions...
  • Page 10 Index ................. . 97 Fujitsu Technology Solutions...

  • Page 11: Innovative Technology

    The Windows drivers for your device can be found on our Internet site. The factory installation of your device does not support any other operating system. Fujitsu Technology Solutions accepts no liability whatsoever if any other operating system is used.

  • Page 12: Notational Conventions

    Names of CDs, DVDs and titles or designations for other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual indicates a key on the keyboard, e.g: indicates terms and texts that are emphasised or highlighted, e.g.: Do This font not switch off the device Fujitsu Technology Solutions...

  • Page 13: Ports And Operating Elements

    11 = Memory card slot 4 = TouchStick (optional) 12 = Fingerprint sensor (optional) 5 = Status indicators 13 = Touchpad buttons 6 = Application buttons 14 = Touchpad 7 = ON/OFF switch 15 = Microphone (optional) 8 = Status indicators Fujitsu Technology Solutions...
  • Page 14 3 = DisplayPort 7 = SmartCard reader 4 = Combined eSATA/USB port Right side 1 = Optical drive 3 = Modem connection (optional) 2 = USB port (lower port has charging function) 4 = DC input connector (DC IN) Fujitsu Technology Solutions...
  • Page 15 Ports and operating elements Rear 1 = Serial port 2 = LAN port Fujitsu Technology Solutions...
  • Page 16 Ports and operating elements Bottom 1 = Hard disk service compartment 5 = Memory service compartment 2 = Battery release 6 = Battery release 3 = Rechargeable battery 7 = Ventilation slot cover 4 = Port Replicator port Fujitsu Technology Solutions...

  • Page 17: Important Notes

    (e.g. petrol station, paintshops), as the transmitted radio waves can cause an explosion or a fire. For information on how to switch radio components on and off, see chapter "Switching the wireless components on and off", Page Fujitsu Technology Solutions...

  • Page 18: Energy Saving

    ► Enquire with the corresponding government office of the country you will be travelling in as to whether you may operate the radio component integrated in your notebook there (see also "CE marking", Page 91). Fujitsu Technology Solutions...

  • Page 19: Notebook: Transporting

    The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth which has been moistened in mild domestic detergent and then carefully wrung out. To clean the keyboard and the touchpad, if available, you can use disinfectant wipes. Ensure that no liquid enters the device. Fujitsu Technology Solutions...

  • Page 20: First-Time Setup Of Your Device

    ► Unpack all the individual parts. Packaging Transport ► Check your device for any visible damage which may have occurred during transportation. You may need the packaging in the future, if you need to transport your device. Fujitsu Technology Solutions...

  • Page 21: Selecting A Location

    ► Connect the power cable (1) to the mains adapter. ► Plug the mains cable (2) into a mains outlet. ► Connect the mains adapter cable (3) to the DC jack (DC IN) of the device. Fujitsu Technology Solutions...

  • Page 22: Switching On The Device For The First Time

    ► During installation, follow the instructions on screen. If a Windows operating system is installed on your device, you will find more information on the system and drivers, help programmes, updates, manuals etc. on the device or on the Internet at "http://ts.fujitsu.com/support". Fujitsu Technology Solutions...

  • Page 23: Working With The Notebook

    The indicator is illuminated: The notebook is switched on. • The indicator flashes (1 second on/1 second off): The notebook is in power saving mode. • The indicator is not illuminated: The notebook is switched off or is in Save-to-Disk mode. Fujitsu Technology Solutions...
  • Page 24 0% and 12% of maximum capacity. • The indicator flashes red (1 second on/1 second off). Malfunction. • The indicator is not illuminated: The first battery is not installed or is not charged. Fujitsu Technology Solutions...
  • Page 25 Scroll Lock indicator Indicator ScrollLock Indicator ScrollLock The indicator is illuminated: The key combination has been pressed. The effect that this key has varies between applications. Fujitsu Technology Solutions...

  • Page 26: Switching On The Notebook

    (e. g. from the Windows Start menu, by clicking on Start – Shut Down – OK). Notebook ► If the notebook is not switched off automatically, press the ON/OFF switch for approx. five seconds. ► Close the LCD screen. Fujitsu Technology Solutions...

  • Page 27: Keyboard

    The figure below shows how to access the different characters on keys with overlaid functions. The example applies when the Caps Lock key has not been activated. The illustrations shown below may differ from your actual device. Alt Gr Fujitsu Technology Solutions...

  • Page 28: Key Description

    The cursor keys move the cursor in the direction of the arrow, i.e. up, down, left, or right. Cursor keys Cursor controlkeys Start key The Start key opens the Windows Start menu. Startkey Menu key The Menu key invokes the menu for the marked item. Fujitsu Technology Solutions...

  • Page 29: Virtual Numeric Keypad

    2 = Valid characters when the key is not activated is activated Further information about the status indicators can be found in chapter "Status indicators", Page The virtual numeric keypad is not supported if you have order the 10-key option. Fujitsu Technology Solutions...

  • Page 30: Key Combinations

    If an external monitor is connected, the monitor on which the output is to be displayed can be selected with this key combination. You can opt to use: • just the notebook’s LCD screen • just the external monitor • both the LCD screen and the external monitor Fujitsu Technology Solutions...

  • Page 31: Country And Keyboard Settings

    Country and keyboard settings If you want to change the country and keyboard settings, proceed as follows: ► Enter the settings by clicking Start – (Settings) – Control Panel – Time, Regional and Language Options. Fujitsu Technology Solutions...

  • Page 32: Application Keys

    Working with the notebook Application keys Applicationkeys Your notebook is equipped with five application keys. All application buttons are freely programmable, see "Programming the application keys", Page Fujitsu Technology Solutions...

  • Page 33: Programming The Application Keys

    You will find the Application Panel under Start - (Settings) - Control Panel - Additional Control Panel Options - Application Panel. Windows Vista and Windows 7: You will find the Application Panel under Start symbol - Programs - Lifebook Application Panel. Fujitsu Technology Solutions...

  • Page 34: Touchpad And Touchpad Buttons

    ► Tap the touchpad once or press the left button once.  The item is selected. Executing commands ► Move the pointer to the field you wish to select. Touchpad ► Tap the touchpad twice or press the left button twice.  The command is executed. Fujitsu Technology Solutions...

  • Page 35: Dragging Items

    LCDscreen Notes High-quality TFT displays are installed in notebooks from Fujitsu Technology Solutions GmbH. For technical reasons, TFT monitors are manufactured for a specific resolution. An optimal, clear picture can only be ensured with the correct resolution intended for the relevant TFT monitor. A monitor resolution which differs from the specification can result in an unclear picture.

  • Page 36: Webcam

    If you wish to carry out a function test with your webcam, you can use the corresponding test software available at "http://ts.fujitsu.com/support/". Fujitsu Technology Solutions...

  • Page 37: Rechargeable Battery

    If you do not use the batteries for long periods, remove them from the notebook. Never store the batteries in the device. Removing and installing the battery Only use rechargeable batteries approved by Fujitsu Technology Solutions for your notebook. Never use force when fitting or removing a battery.

  • Page 38: Removing A Battery

    ► Position the battery at the edge. ► Insert the battery into the battery compartment until it engages positively (1). ► Slide the release button in the direction of the arrow (2). ► Complete the removal, see chapter "Finishing component removal", Page Fujitsu Technology Solutions...

  • Page 39: Module

    The module can now be removed without any further actions being necessary. Removing a module Module Drive WeightSaver ► Pull the unlocking lever in the direction of the arrow (1). ► Now pull the module out of the module bay (2). Fujitsu Technology Solutions...

  • Page 40: Installing A Module

    Avoid storing a data carrier in areas subject to high temperatures or humidity. You may use both 8-cm and 12-cm data carriers in the optical drive. When using a data carrier of lesser quality, vibrations and reading errors may occur. Fujitsu Technology Solutions...

  • Page 41: Cd/Dvd Indicator

    ► Place the data carrier in the drive tray with the printed side facing upwards. ► Remove a data carrier that has been inserted. ► Push in the drive tray until you feel it lock into place. Fujitsu Technology Solutions...

  • Page 42: Manual Removal (Emergency Removal)

    Do not use any cleaning liquids! Ensure that no liquid enters the device. To avoid overheating of the device, do not remove the ventilation slot cover when the device is switched on. ► Prepare for removal, see chapter "Preparing to remove components", Page Fujitsu Technology Solutions...
  • Page 43 ► Clean the dust chamber. ► Insert the ventilation slot cover into the slot (1) at an angle as shown, and ensure that you feel it click into place. ► Complete the removal, see chapter "Finishing component removal", Page Fujitsu Technology Solutions...

  • Page 44: Using The Power-Management Features

    If you do not intend to use your notebook for a long period of time: ► Exit power saving mode if necessary via the mouse or keyboard or by switching on the notebook. ► Close all opened programs and completely shut down the notebook. Fujitsu Technology Solutions...

  • Page 45: Memory Cards

    The label should be facing upward. Do not apply excessive force, as otherwise the delicate contact surfaces could be damaged. Memory card  Depending on the particular type used, the memory card may protrude slightly from the slot. Fujitsu Technology Solutions...

  • Page 46: Removing The Memory Card

    Wait for the dialogue box which tells you that it is now safe to remove the memory card. ► On devices with card locking: Press on the storage card (1). Memory card  The storage card is released and can now be removed. ► Pull the storage card out of the slot (2). Fujitsu Technology Solutions...

  • Page 47: Expresscards

    Do not use excessive force. Depending on the type, the card may protrude slightly from the slot. Please see the documentation relating to the card for driver installation instructions. Fujitsu Technology Solutions...

  • Page 48: Removing The Card

    If you attach an external microphone, the built-in microphone is disabled. When you connect headphones or external speakers, the built-in speakers are disabled. Information on connecting headphones and a microphone can be found "Connecting external devices", Page Fujitsu Technology Solutions...

  • Page 49: Integrated 56K Modem

    Multifrequency (MFC) dialling: Belgium, Denmark, Germany, Finland, France, Greece, Great Britain, Holland, Ireland, Iceland, Italy, Luxembourg, Norway, Austria, Portugal, Sweden, Switzerland and Spain. Pulse dialling: Belgium, France, Holland and Italy. Also in: Poland, Slovenia, South Africa and Hungary. Fujitsu Technology Solutions...

  • Page 50: Connecting Notebook Modem To Telephone Wall Socket

    ► Connect the modem cable to the modem port of the notebook (1). Modem ► Plug the modem cable (2) into the country-specific telephone adapter (3). ► Connect the modem cable to your telephone wall socket (4). Fujitsu Technology Solutions...

  • Page 51: Sim Card

    ► Press on the edge of the SIM card so that it jumps up slightly out of the slot. ► Pull the SIM card out of the slot in the direction of the arrow (2). ► Complete the removal, see chapter "Finishing component removal", Page Fujitsu Technology Solutions...

  • Page 52: Wireless Lan/ Bluetooth (Device-Dependent) / Umts (Device-Dependent)

    Working with the notebook Wireless LAN/ Bluetooth (device-dependent) / UMTS (device-dependent) The installation of a radio components not approved by Fujitsu Technology Solutions will invalidate the certifications issued for this device. Switching the wireless components on and off Before switching on your device for the first time, the on/off switch for radio components must be in the "ON"...

  • Page 53: Setting Up Wlan Access

    The optional UMTS module is ready for use immediately. If you have not ordered a UMTS module, you can purchase the accessories for UMTS reception from specialised dealers or from your Fujitsu Technology Solutions dealer. You will find information on establishing the connection with the UMTS network in the documentation for the hardware used.

  • Page 54: Your Port Replicator (Optional)

    6 = VGA monitor port of the notebook 7 = DVI monitor port 16 = ON/OFF switch 8 = DisplayPort 17 = Unlocking lever 9 = e-SATA port 10 = USB ports Fujitsu Technology Solutions...

  • Page 55: Connecting The Notebook To The Port Replicator

    ► Remove the power plug of the mains adapter from the mains socket. ► Disconnect the mains adapter cable from the DC socket (DC IN) of the notebook. ► Ensure that the positioning aid (a) of the Port Replicator is folded in (1). Fujitsu Technology Solutions...

  • Page 56: Connecting The Mains Adapter To The Port Replicator

    "Docked" mode. In this profile, for example, the setting is saved as to which monitor was last used for output. This profile will be loaded, as soon as the notebook is connected to a Port Replicator of the same type. Fujitsu Technology Solutions...

  • Page 57: Switching On The Notebook Via The Port Replicator

    If the notebook cannot be shut down properly, press the ON/OFF button on the Port Replicator for approx. four seconds. The notebook will switch off. Any unsaved data may however be lost. Fujitsu Technology Solutions...

  • Page 58: Disconnecting The Notebook From The Port Replicator

    ► Switch the notebook off. ► Pull the unlocking lever in the direction of the arrow (1), until you hear the notebook unlatch. ► Lift off the notebook (2). Fujitsu Technology Solutions...

  • Page 59: Security Functions

    The fingerprint sensor can record an image of a fingerprint. With additional fingerprint software, this image can be processed and used instead of a password. ► You must install the fingerprint software in order to be able to use the fingerprint sensor (1). Fujitsu Technology Solutions...

  • Page 60: Use Kensington Lock

    Utility, while the user password only provides some of the functions. You can only set a user password if a supervisor password has already been assigned. Please refer to the "Settings in BIOS Setup Utility", Page 78 section for a description of how to call up and operate the BIOS Setup Utility. Fujitsu Technology Solutions...
  • Page 61 ► In the Exit menu, select the option Save Changes & Exit. ► Select Yes and press the Enter key.  The notebook will now reboot with the password removed. Removing the supervisor password simultaneously deactivates the user password. Fujitsu Technology Solutions...

  • Page 62: Password Protection For Booting Of The Operating System

    If you do not want to change any other settings, you can exit BIOS Setup Utility. ► Select the Save Changes & Exit option under Exit.  The notebook will reboot. The system is no longer password-protected. Fujitsu Technology Solutions...

  • Page 63: Password Protection For The Hard Disk

    ► To cancel the password for the second hard disk (Drive1), go to the Drive1 area and select the field Set Master Password, then proceed in exactly the same way as for cancelling the password for the first hard disk (Drive0). Fujitsu Technology Solutions...

  • Page 64: Boot From Removable Media

    Setup Notice: Changes have been saved is displayed to confirm that the text has been saved. ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes.  The notebook will restart and the Owner Information will be adopted. Fujitsu Technology Solutions...

  • Page 65: Virus Warning (Device-Dependent)

    ► Select Enabled to activate the Virus Warning function. ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes.  The notebook will restart and the settings will be adopted. Fujitsu Technology Solutions...

  • Page 66: Smartcard Reader

    In order to be able to take advantage of all the security features of your notebook, you will need a CardOS SmartCard from Fujitsu Technology Solutions. The SmartCard can only be used with a PIN, offering maximum protection even if you lose the SmartCard.

  • Page 67: Trusted Platform Module (Tpm) (Device-Dependent)

    ► Select Disabled to deactivate the TPM. ► From the Exit menu, choose the option Exit Saving Changes. ► Press the Enter key and select Yes.  Your notebook will now restart and TPM will be disabled. Fujitsu Technology Solutions...

  • Page 68: Connecting External Devices

    Disconnecting devices from the notebook 1. Turn off your notebook and all external devices. 2. Unplug your notebook and all devices from the mains sockets. 3. Disconnect the cables for your external devices following the instructions. Devices Peripheraldevices Fujitsu Technology Solutions...

  • Page 69: Connecting An External Monitor

    ► First switch on the external monitor and then the notebook. You can also switch between the external monitor and the LCD monitor of the notebook, see chapter "Key combinations", Page You can display the same picture on the external monitor and the notebook LCD monitor simultaneously. Fujitsu Technology Solutions...

  • Page 70: Connecting External Devices To The Parallel Or Serial Port

    The devices connected to the parallel or serial port require drivers. Your operating system already includes many drivers. If the required drive is missing, install it. Current drivers are usually available on the Internet or will be supplied on a data medium. Fujitsu Technology Solutions...

  • Page 71: Connecting Usb Devices

    Additional information can be found in the documentation for the USB devices. ► Connect the data cable to the external device. ► Connect the data cable to a USB port of the notebook. Device drivers USB devices will be automatically recognised and installed by your operating system. Fujitsu Technology Solutions...

  • Page 72: Usb Port With Charging Function

    You can use this USB port to charge or supply power to a USB device (e.g. to charge a PDA or a mobile phone or to connect a USB lamp), even if the notebook is switched off. Fujitsu Technology Solutions...

  • Page 73: Connecting An External Sata Hard Disk (Esata)

    ► Left-click on the symbol to remove hardware safely. ► Select the device you wish to shut down and remove. ► Press the "Enter" key.  Wait for the dialogue box which tells you that it is now safe to remove the device. Fujitsu Technology Solutions...

  • Page 74: Connecting External Audio Devices

    If you purchase a cable from a retailer, please note the following information: The headphone port on your notebook is a "3.5 mm jack socket". If you want to connect headphones or a speaker you will need a "3.5 mm jack plug". Fujitsu Technology Solutions...

  • Page 75: Removing And Installing Components During Servicing

    The equipment and tools you use must be free of static charges. • Remove the power plug from the mains supply before inserting or removing boards containing ESDs. • Always hold boards with ESDs by their edges. • Never touch pins or conductors on boards fitted with ESDs. Fujitsu Technology Solutions...

  • Page 76: Preparing To Remove Components

    Otherwise, there is a risk of suffering burns! As some components are exposed that are sensitive to static electricity, please take note of chapter "Notes on installing and removing boards and components", Page Fujitsu Technology Solutions...

  • Page 77: Removing A Cover

    Removing memory modules ► Carefully push the two mounting clips outwards (1). Memory expansion Memory module  The memory module snaps upwards (2). ► Pull the memory module out of its slot in the direction of the arrow (3). Fujitsu Technology Solutions...

  • Page 78: Installing A Memory Module

    If you remove more than one component at the same time, keep the screws for the individual components separate from each other and make sure that you use the correct screws. If you install the wrong screws, components may be damaged. ► Tighten the screw (2). Fujitsu Technology Solutions...

  • Page 79: Removing And Installing The Hard Disk

    ► Lift the cover off the notebook (2). Removing a hard disk ► Use the pulling aid to pull the hard disk in the direction of the arrow (1) until the contacts disengage. ► Remove the hard disk from the hard disk compartment (2). Fujitsu Technology Solutions...

  • Page 80: Installing A Hard Disk

    If you install the wrong screws, components may be damaged. ► Tighten the screws (2). ► Insert the battery (see Chapter "Installing a battery", Page 34). Fujitsu Technology Solutions...

  • Page 81: Finishing Component Removal

    ► Install the battery again (see "Installing a battery", Page 34). ► Turn the notebook the right way up again and place it on a flat surface. ► Reconnect the cables that you disconnected before. Fujitsu Technology Solutions...

  • Page 82: Settings In Bios Setup Utility

    ► Select the option you want to change with the cursor keys ↑ ↓ ► Press the Enter key. ► Press the key to exit the selected menu. ► For future reference, make a note of the changes you have made (for example, in this manual). Fujitsu Technology Solutions...

  • Page 83: Exiting Bios Setup Utility

    ► If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes. Save Changes and Power Off ► To save the changes and switch off your device, select Save Changes and Power Off and Yes.  The changes are saved. Your device is shut down. Fujitsu Technology Solutions...

  • Page 84: Troubleshooting And Tips

    PC if you are running processor-intensive gaming software, e.g. games with intensive 3D graphics. Updating your hardware with drivers which have not been approved by Fujitsu Technology Solutions may result in performance losses, data losses or malfunction of the equipment. A list of approved drivers and current BIOS versions can be downloaded from: "http://ts.fujitsu.com/support/downloads.html"...

  • Page 85: Help If Problems Occur

    The SystemDiagnostics program is already installed on devices which were delivered with a Windows operating system. ► To start the SystemDiagnostics program, click on Startsymbol - Program - Fujitsu - SystemDiagnostics. ► If a problem is found during a test run, the SystemDiagnostics program outputs a code (e.g.

  • Page 86: The Notebook's Date Or Time Is Incorrect

    "Key combinations", Page The LCD screen is difficult to read LCDscreen LCDscreen Cause Troubleshooting Reflected glare ► Turn the notebook or alter the tilt of the LCD screen. ► Increase the brightness of the screen. Fujitsu Technology Solutions...

  • Page 87: The External Monitor Remains Blank

    Change the following setting: ► Set the screen resolution: Set the screen resolution as described in the documentation for your operating system. ► Select monitor: Select monitor 1 or 2 as described in the documentation for your operating system. Fujitsu Technology Solutions...

  • Page 88: The Notebook Cannot Be Started

    (by restarting the operating system or switching the device off and back on again). The battery is dead. ► Charge the battery. ► Insert a charged battery. ► Connect the mains adapter to the notebook. Fujitsu Technology Solutions...

  • Page 89: The Printer Does Not Print

    ► Further information on using the radio component can be found in the help files. Acoustic warnings Acoustic error messages Errors Cause Troubleshooting A beep sounds every few seconds. ► Charge the battery. The battery is almost flat. Fujitsu Technology Solutions...

  • Page 90: Error Messages On The Screen

    Press <F1> to resume, <F2> to SETUP ► Press the function key to start the operating system. This error message appears if an error occurs ► Press the function key to access the during the self-test before starting the operating BIOS Setup. system. Fujitsu Technology Solutions...
  • Page 91 ► Contact your sales outlet or our customer service centre. System cache error - Cache disabled ► Contact your sales outlet or our customer service centre. System timer error ► Contact your sales outlet or our customer service centre. Fujitsu Technology Solutions...

  • Page 92: Technical Data

    Rechargeable battery You can find information on the batteries used in your device on the Internet at "http://ts.fujitsu.com/support". You can use different batteries. When ordering your device you can select between main battery 1 and main battery 2. In addition, you can order the optional battery for installation in the module compartment.

  • Page 93: Mains Adapter 80W

    Technical data Mains adapter 80W Technicaldata Rated voltage 100 V to 240 V (automatic) Max. rated current 4.22 A An additional mains adapter or power cable can be ordered at any time. Fujitsu Technology Solutions...

  • Page 94: Manufacturer's Notes

    The "Declarations of Conformity" for the device can be found at our Internet address under: "http://ts.fujitsu.com/ce". Fujitsu Technology Solutions hereby declares that your device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Fujitsu Technology Solutions...

  • Page 95: Ce Marking

    Federal Communications Commission (FCC) of the USA. Although it is not explicitly forbidden to travel in the US trading area carrying this device, to avoid trouble at customs clearance, Fujitsu Technology Solutions GmbH recommends not to bring this device into the US trading area.

  • Page 96: Regulatory Information For Notebooks Without Radio Device

    Regulatory information for notebooks without radio device Regulatoryinformation NOTICE: Changes or modifications not expressly approved by Fujitsu Technology Solutions could void this user’s authority to operate the equipment. Notice to Users of Radios and Television These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 97: Doc (Industry Canada) Notices

    Repairs to telecommunication equipment should be made by a Canadian authorised maintenance facility. Any repairs or alterations not expressly approved by Fujitsu or any equipment failures may give the telecommunication company cause to request the user to disconnect the equipment from the telephone line.
  • Page 98 Les réparations de l’équipement de télécommunications doivent être effectuées par un service de maintenance agréé au Canada. Toute réparation ou modification, qui n’est pas expressément approuvée par Fujitsu, ou toute défaillance de l’équipement peut entraîner la compagnie de télécommunications à exiger que l’utilisateur déconnecte l’équipement de la ligne téléphonique.

  • Page 99: Fcc Regulatory Information For Notebooks With Radio Device

    In order to comply with RF exposure limits established in the ANSI C95.1 standards, the distance between the antennas and the user should not be less than 20 cm (8 inches). Regulatory Notes and Statements Radio device, health and authorisation for use Fujitsu Technology Solutions...
  • Page 100 (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesirable operation. Modifications not expressly authorised by Fujitsu Technology Solutions may invalidate the user’s right to operate this equipment. Fujitsu Technology Solutions...

  • Page 101: Index

    CD/DVD indicator 21, 37 Ethernet LAN 49 CD/DVD: ExpressCard 43 manual emergency removal 38 External devices CE marking 91 Connecting 66 Charging capacity, battery 33 Cleaning 15 Components installing / removing 71 Fault Configuration, BIOS Setup Utility 78 correction 80 Fujitsu Technology Solutions...
  • Page 102 82 stops working 84 notes 31 switching off 22 reflected glare 82 transporting 14–15 remains blank 82 using 19 LCD screen is too dark 82 Notebook, operation 19 Life, battery 33 Line feed 24 Fujitsu Technology Solutions...
  • Page 103 System configuration 78 System expansion 72 Radio component: see Adding memory 72 safety notes 13 System settings, BIOS Setup Utility 78 Rechargeable battery 33 see Battery 33 Regulatory information Tab key 24 notebooks with radio device 95 Fujitsu Technology Solutions...
  • Page 104 Weight Saver Transport damage 16 Removing 35 Transportation 14–15 Wireless LAN Travel, notebook 14 Switching off module 48 Troubleshooting 80 Switching on module 48 Trusted Platform Module 63 Wireless LAN: safety notes 13 USB charging function 68 Fujitsu Technology Solutions...

Table of Contents