NETGEAR RT338 Reference Manual page 156

Enable the router to send the following types of syslog messages:
• Call detail record (CDR)
• Filter event log
• PPP event log
• Packet trigger
• Voice call (POTS) log
To configure the router for logging with the syslogd program on a local host:
Go to Menu 24.3.2 - System Maintenance - UNIX Syslog and Accounting.
1.
Set Active to Yes.
2.
In the Syslog IP Address field, enter the IP address of the syslogd host PC.
3.
Select a number for Log Facility.
4.
Choose any facility number, but the syslog program must be set to the same number.
Select the message types to be logged, and save this menu.
5.
To configure the syslogd program on the local host PC:
Edit /etc/syslog.conf to add the line:
1.
local n .*
for example:
local6.*
In the syslogd startup script, add the -r option to enable logging from a remote host.
2.
System Maintenance
Reference Guide for the Model RT338 ISDN Router
/ name_of_log_file
/var/log/rt338.log
11-7