Understanding The Led Indicators - Intermec PF8d User Manual

Chapter 1 — Using the PF8 Printers

Understanding the LED Indicators

6
When power to the printer is switched on, the status LED turns green,
indicating that the printer is ready to accept print commands.
If the printer runs out of media or ribbon during printing, the LED
turns red.
Other status indicators are shown in the table below. For more
information on the various printer modes, see the ESim for the PC4 and
PF8 Bar Code Label Printer Programmer's Reference Manual
(P/N 937-011-xxx).
LED Status Indicators
LED Meaning
Green (blinking) Auto-Sensing mode
Green (blinking) Downloading font, form, or graphic
Green (solid) Dump mode
Green (solid) Ready mode
Green (solid) Print mode
Orange (solid) Boot mode
Red (blinking) Media jam, overheated printhead or stepper motor
Red (blinking) Downloading firmware
Red (solid) Error mode
PF8d/PF8t Printer User's Guide