Troubleshooting - iRobot Cleaning System Owner's Manual

Irobot scooba's cleaning system user's manual
Table of Contents

Advertisement

Troubleshooting

warning lights
Scooba has several warning lights that tell you if the robot needs assistance.
warning light
Possible Cause
Check Brush
The brush is jammed
Light
The cleaning head is
improperly installed
The filter is missing
Check Tank
The tank not is in
Light
the robot
The cleaning cycle
is compete
The pump needs to
be primed
Power Light
Battery is discharged
(Red)
Power
Light
Service
Light
what To Do
Remove and clean Scooba's brush and cleaning
head. With cleaning head and tanks removed,
turn Scooba over, inspect and clean the cleaning
head area.
Remove and replace Scooba's cleaning head.
(page 18)
Remove, rinse and replace Scooba's filter. Ensure
filter is installed properly. (page 17)
Place the tank in the Robot and make sure the
tank latch is securely closed.
Empty the Dirty and Clean tanks.
(see page 23 for additional troubleshooting)
Prime Scooba's pump with the included
suction bulb. (see page 24 for details)
Recharge Scooba's battery. (page 11)
Clean
Check Brush
Light
Light
Check Tank
Light
www.irobot.com
I'm Stuck
Light
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scooba 350Scooba 380

Table of Contents