Charging Roomba; Cleaning With Roomba - iRobot Roomba 4210 User Manual

Charging Roomba

You need to charge Roomba
before cleaning for the first time.
Place APS battery into Roomba Robotic Floorvac.
1
Press down on both ends.
For best battery performance, always
keep Roomba plugged in or on the Home Base
when not in use.
Plug the charger directly into Roomba or
2
place Roomba on the Home Base while
the Base is plugged in. (See page 12)
Charge for 3 hours.
3
Power light will turn solid green to indicate a
4
full charge.
Unplug the charger and press clean or just
5
press clean if Roomba is on the Home Base.
Roomba will run for up to 120 minutes on hard
6
floors. Run times may vary based on floor surface.
4

Cleaning with Roomba

Cleaning Pattern
battery is nearly depleted, up to 120 minutes and will then return to the Home Base.
Spot mode - Roomba will spiral approximately 3 feet in diameter and then spiral back to
where it started, intensly cleaning a localized area.
5
Before cleaning with Roomba, clear the
floor of loose objects. If you don't
vacuum over it, don't use Roomba
over it (e.g., rug tassels, power and
blind cords).
Roomba will clean based on the
cleaning mode you select. Roomba has
three cleaning modes:
Clean mode - Roomba automatically
calculates the room size and adjusts its
cleaning time appropriately. Roomba
may clean for up to 60 minutes.
Max mode - Roomba will run until its
You can use a Virtual Wall to block
off areas you don't want Roomba to enter.
(See page 10)