Power Saving Menu; Setting Menu - Lorex LW2002 Series Instruction Manual

Portable color lcd digital wireless monitoring system

Hide thumbs Also See for LW2002 Series:

Table of Contents

Available languages

Accessing Menu System

Power Saving Menu

The Power Saving Menu is used to turn off the screen at a

predetermined time, when there is no camera detected or

connected to the receiver. This function can be set to 1 minute,

2 minutes, 5 minutes, 10 minutes, or disabled by selecting

Cancel.

The Setting Menu contains 2 submenus:

1. A/V Out: Changes the quality of the image sent to the A/V

receiving device (i.e. TV or Monitor).

2. Default: Resets all menu settings to Factory Default.

NOTE: Resetting the receiver will not reset all Camera Pairing.

A/V Out Menu

The A/V Out menu option is used to adjust the Resolution

Quality of the image sent to the Viewing Device (such as a TV,

VCR or Monitor). Use the UP and DOWN ▲▼ arrows to select

a Resolution, and press OK to accept.

It is strongly recommended to use the "High" setting to ensure

the best image reproduction on large screens – the default

setting is "High".

Setting Menu

The Setting option is used to reset the Receiver to Factory

Defaults – all menu settings will be reset. Use the UP and

DOWN ▲▼ arrows to select YES, and press OK to accept.

NOTE: Camera pairing settings will NOT be affected by a

reset. Cameras will remain paired with the Receiver.

Table of Contents

Table of Contents