Panasonic Lumix DMC-FH6P Service Manual page 13

• Step 6. Choose the model number in "INITIAL SETTINGS": (Only for "EB/EE/EG/EP" models.)
This step is necessary only for "EB/EE/EG/EP".
Only for model suffix with "EB/EE/EG/EP", there are two kind of model; (DMC-FS40 and DMC-FS41) ,due to difference of sales
channel.Therefore, not only model suffix, but also model number (FS40 or FS41) has to be set up in the "INITIAL SETTINGS".
(The "FS40" is displayed as default status.)
When the model number is one of the "DMC-FS41EB/EE/EG/EP", change the model number with the following procedure:
Press the [Delete/Return] button in order to change the indication from "FS40" into "FS41".
(Each time one presses the [Delete/Return] button, model indication is changed from "FS40" to "FS41" (Toggle switch))
• Step 7. Set the model suffix in "INITIAL SETTINGS":
Press the "[ RIGHT ] of Cursor buttons".
The only set area is displayed, and then press the "[ RIGHT ] of Cursor buttons" after confirmation.
(The unit is powered off automatically.)
13