Table of Contents
Advertisement
II. Map information and cursor menu
When placing the cursor on top of an
object, an information window appears that
shows some important information as LAT/
LON, Bearing, Elevation, and aeronautical
objects info in case the cursor is positioned
on an airport, VFR, etc... To get complete
information of the object, select ENTER.
The cursor menu will appear from which it is
possible to select:
• Objects info, to visualize the information
of the selected object.
• Airspaces, to visualize the information of
the airspaces of the cursor position.
• Add to FP, to add the cursor point (Object)
12
- Quick Manual
Aeronautical Navigator
to the activated Flight Plan.
• Add user point, to save the cursor point
as user point.
III. MODE menu on Map
Important
options
visualization and map layout can be
accessed without leaving the map page,
using the Mode menu.
When the map is displayed, press the
MODE button on the keyboard. A menu of
two lines will appear on the bottom of the
map page. Scroll with the joystick or with the
wheel on top of the line above to select the
set of options to modify.
• Data overlay
• Land Elevation
• Vertical Profile
• HSI window
• Data fields
Select ENTER on top of one of these fields
to enter in the line below, where you can
scroll down and choose various options.
For example, select Land Elevation, push
ENTER and choose between to show or to
hide the visualization of the coloured Land
Elevation.
Selecting HSI or Data Fields in the list it is
also possible to get access to the Layout
Configuration
Page
previous paragraph.
Selecting Data Overlay it is possible to
enable the TAWS feature.
AvMap EKPV
regarding
map
introduced
in
the
Advertisement
Table of Contents
