Invacare Harrier XHD User Manual page 32

NOTE:
Each backrest post must be positioned in the same plane as the other or the backrest will be twisted. To
enable the chair to be more portable, the backrest can be either folded down or detached from the
wheelchair base.
TO FOLD THE BACKREST:
1. Unscrew the locking screw knob (C) approximately five
full turns. Lift the backrest upwards and then fold forwards
onto the seat.
2. To detach, unscrew the locking screw knob an additional
three full turns. Do not loosen the cross-headed screw.
3. Push the backrest slightly forward and lift upwards.
4. To re-locate the backrest, ensure the pins align into the
slots of the hinge bracket, fully re-tighten the locking
screw knobs on both sides.
A
B
C
32