Invacare Harrier XHD User Manual page 19

19
REACHING - BENDING BACKWARDS
• Again ensure power is switched OFF.
• Do not reach back any further than your arm will extend without changing your sitting position.
• Do not lean over the top of the backrest as it will shift the centre of gravity, risking tipping over.
• Do not hang heavy loads or objects on the backrest. They may make the powered wheelchair unstable,
especially on an incline.
TRANSFERRING TO AND FROM OTHER SEATS
• Always turn the wheelchair power OFF and engage the motor locks/clutches to prevent the wheels from
moving before attempting to transfer in or out of the wheelchair. Also, make sure every precaution is
taken to reduce the gap distance by turning both front castors away from the object you are transferring
onto.
• When transferring, position yourself as far back as possible in the seat. This will prevent broken screws,
damaged upholstery and the possibility of the wheelchair tipping forward.
• Note: This activity may be performed independently provided you have adequate mobility and upper body
strength.
• Position the wheelchair as close as possible along side the seat to which you are transferring, with the rear
wheels pointing away from it.
• Shift body weight into seat with transfer.
• During independent transfer, little or no seat platform will be beneath you. Use transfer board if at all
possible.