Table of Contents
Advertisement
Hardware Installation
2-3.1 CPU Installation
To perform the installation of your new SY-7IWM-X Motherboard,
follow the steps below:
Mark your CPU Frequency:
your CPU that should be clearly marked on the CPU cover.
FSB 66MHz
400MHz (66 x 6.0)
433MHz (66 x 6.5)
FSB 100MHz
500MHz (100 x 5.0)
550MHz (100 x 5.5)
FSB 133MHz
533MHz(133x4.0)
600MHz(133x4.5)
This Motherboard is designed to support processors with 100MHz FSB.
However, Socket 370 processors with 100MHz FSB are not available at
present.
CPU Mount Procedure:
have purchased separately, follow these instructions.
1.
Lift the socket handle up to a vertical position.
466MHz (66 x7.0)
533MHz (66 x 8.0)
500MHz (66 x7.5)
566MHz (66 x 8.5)
600MHz (100 x 6.0)
650MHz (100 x 6.5)
667MHz(133x5.0)
800MHz(133x 6.0)
733MHz(133x5.5)
866MHz(133x 6.5)
To mount the Celeron
Record the working frequency of
600MHz (66 x 9.0)
633MHz (66 x 9.5)
700MHz (100 x 7.0)
750MHz (100 x7.5)
933MHz(133x 7.0) 1.13GHz(133x 8.5)
1000MHz(133x 7.5)
20
SY-7IWM-X
667MHz (66 x 10.0)
700MHz (66 x 10.5)
800MHz (100 x 8.0)
850MHz (100 x 8.5)
processor that you
TM
Advertisement
Table of Contents
