SOYO SY-7IWM-X User Manual page 71

BIOS Setup Utility
3-4.6 Onboard Serial Ports
Onboard Serial
Ports
Onboard
Serial Port 1
UART Mode Select
If [UART Mode Select] is set to [IrDA]/[ASKIR]
RxD, TxD Active
IR Transmittiion
delay
3-4.7 IR Pins Controls
IR Pins Controls Setting
IR Duplex mode
Use IR Pins
3-4.8 Onboard Parallel Ports
Onboard Parallel Ports Setting
Onboard Parallel Port
Setting
Disabled
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Auto
Normal
IrDA
ASKIR
Hi, Hi, Lo, Lo,
Lo, Hi, Hi, Lo
Disabled
Enabled
Description
Half This item allows you to select the
IR half/full duplex function.
Full
IR- This item allows you to select IR
RX2TX2 transmission routes, one is
RxD2m, TxD2 (COM Port) and
IR-RX
the other is IR-Rx2Tx2.
TX
Disabled
378/IRQ7
3BC/IRQ7
278/IRQ5
67
Description
Choose serial port I/O
address.
Do not set port to the
same address except for
Disabled or Auto.
The second serial port
offers these InfraRed
interface modes.
This item allows you to
determine the active of
RxD, TxD.
Some IR devices need
this item enabled.
Description
Choose the printer I/O
address.
SY-7IWM-X
Note
Default
Default
Default
Note
Default
Default
Note
Default