Advertisement
TWEETER SWITCH
19
be switched to the OFF position.
EXTERNAL SPEAKER OUTPUT
20
Speakon™ type powered output for powering a passive enclosure.
FOOTSWITCH JACK
21
The crunch and compressor buttons MUST be pushed in to operate with the footswitch.
EFFECTS LOOP
22
The Send Jack provides a pre amp output that may be used to drive slave ampli ers and external
e ects processors. The Return Jack provides a power amp input for the last e ect in the chain. NOTE:
When using the unit as a slave power ampli er, the Return Jack should be used as the input.
GROUND LIFT
23
position), Ground Lift is engaged.
DIRECT INTERFACE (DI)
24
This is a built-in, balanced Direct Interface is used to send a buffered, unprocessed signal to an
external mixer.
10
-
Advertisement
