Appendix F. Use A Pc To Control An Ioptron Mount - iOptron SmartStar G-MC90 Instruction Manual

Smartstar-g series mount and telescopes

Hide thumbs Also See for SmartStar G-MC90:

Table of Contents

Appendix F. Use a PC to Control an iOptron Mount

In general you need the followings to use a PC to control a SmartStar-G mount,

1. Download USB2COM driver (PL-2303, zip file for 8402G)

http://www.ioptron.com/support.aspx?catalog=28;

2. Install USB2COM and establish the connection between the mount and the PC (see

instruction);

3. ASCOM platform (download from http://ascom-standards.org/);

4. iOptron ASCOM drive (download it from iOptron website,

http://www.ioptron.com/support.aspx?catalog=28) iOptronAscomSetupV1.02.exe; and

5. Planetarium software.

Some company has integrated iOptron's products into their planetarium software, such

as Voyage and The Sky X Pro. Therefore, an ASCOM plug-in will not be needed. Most

planetarium software can be used to control iOptron's product via ASCOM.

Some other ASCOM drivers, such as LX200 Generic ASCOM driver and AstroPhysics

GTO driver, are also compatible to SmartStar

mount.

Table of Contents