Selecting A Location; Altitude Adjustment - Samsung ML-3470 Series User Manual

Selecting a location

Select a level, stable place with adequate space for air circulation. Allow
extra space for opening covers and trays.
The area should be well-ventilated and away from direct sunlight or
sources of heat, cold, and humidity. Do not set the printer close to the
edge of your desk or table.
Clearance space
Front: 500 mm (enough space
so that trays can be opened or
removed)
Back: 350 mm (enough space
to allow opening of the rear
cover or the duplex unit)
Right: 100 mm (enough space
for ventilation)
Left: 100 mm (enough space
to allow opening of the control
board cover)

Altitude adjustment

The print quality is affected by atmospheric pressure, which is
determined by the height of the machine above sea level. The following
information will guide you on how to set your machine to the best print
quality or best quality of print.
Before you set the altitude value, find the altitude where you are using
the machine.
0
Ensure that you have installed the printer driver with the provided
1
Printer Software CD.
Double-click the Smart Panel icon on the Windows task bar
2
(or Notification Area in Linux).
You can also click Smart Panel on the status bar in Mac OS X.
Click Printer Setting.
3
Click Setting > Altitude Adjustment. Select the appropriate value
4
from the dropdown list, and then click Apply.
Note
IIf your machine is connected to a network, SyncThru Web
Service screen appears automatically. Click Machine Settings
> Setup (or Machine Setup) > Altitude Adj. Select the
appropriate altitude value, and then click Apply.
1.5
<Introduction>
High 3
1
High 2
2
High 1
3
Normal
4