NordicTrack NTEL19911.0 User Manual page 19

During the
workout, the
profiles on
the speed
tab will show
your progress.
The flash-
ing segment
of the profile
represents the current segment of the workout. The
height of the flashing segment indicates the target
speed for the current segment.
At the end of each segment of the workout, a
series of tones will sound and the next segment of
the profile will begin to flash. If a different resis-
tance level and/or target rpm is programmed for
the next segment, the resistance level and/or target
rpm will appear in the display for a few seconds
to alert you. The resistance of the pedals will then
change.
As you exercise, you will be prompted to keep
your pedaling speed near the target rpm for the
current segment. When an upward-pointing arrow
appears in the display, increase your speed. When
a downward-pointing arrow appears, decrease your
speed. When no arrow appears, maintain your cur-
rent speed.
IMPORTANT: The target rpm is intended only to
provide motivation. Your actual pedaling speed
may be slower than the target rpm. Make sure
to pedal at a speed that is comfortable for you.
Profile
4. Follow your progress with the display.
5. Measure your heart rate if desired.
6. Turn on the fan if desired.
7. When you are finished exercising, the console
19
If the resistance level for the current segment is
too high or too low, you can manually override
the setting by pressing the Resistance buttons.
IMPORTANT: When the current segment of the
workout ends, the pedals will automatically
adjust to the resistance level programmed for
the next segment.
Note: The calorie goal is an estimate of the
number of calories that you will burn during the
workout. The actual number of calories that you
burn will depend on your weight. In addition, if
you manually change the resistance level or if
your pedaling speed does not match the target
rpm during the workout, the number of calories
you burn will be affected.
The workout will continue in this way until the last
segment ends. To stop the workout at any time,
stop pedaling. The time will flash in the display. To
resume the workout, simply resume pedaling.
See step 4 on page 16.
See step 5 on page 17.
See step 6 on page 18.
will turn off automatically.
See HOW TO TURN OFF THE CONSOLE on
page 16.